![background image](http://html.mh-extra.com/html/panasonic/wv-nf284-i-pro-network-camera/wv-nf284-i-pro-network-camera_network-operating-instructions_277905004.webp)
4
Monitor Images on a PC
Notes:
• When "ON" is selected for "User Authentication"
(
☞
page 34), the authentication window will be dis-
played before displaying live images for the user
name and password entries. The default user name
and password are as follows.
User name: admin
Password: 12345
When accessing the camera without changing the
default password, the pop-up window saying that it
is recommended to change the password will be dis-
played.
To enhance the security, change the password for
the user "admin". It is recommended to change this
password periodically.
• Maximum concurrent access to the camera will be
limited to up to 8 users in the following case.
• When "Unicast port (AUTO)" is selected for
"Transmission type" (
☞
page 22)
• When "Unicast port (MANUAL)" is selected for
"Transmission type" (
☞
page 22)
• When JPEG images are being transmitted from
the camera
Depending on the set values for "Total bit rate" and
"Max bit rate (per 1 client)", the maximum concurrent
access number may be less than 8 users. When 8
users have been concurrently accessing already, the
access limit message will be displayed for users who
accessed subsequently.
• When "ON" is selected for "MPEG-4 transmission"
(
☞
page 22), an MPEG-4 image will be displayed.
When "OFF" is selected, a JPEG image will be dis-
played. It is possible to display JPEG image even
when "ON" is selected for "MPEG-4 transmission".
In this case, the refresh interval will be limited.
<Refresh interval (JPEG)>
• When "ON" is selected for "MPEG-4 transmission"
JPEG (VGA): 5 fps
JPEG (QVGA): 10 fps
• When "OFF" is selected for "MPEG-4 transmission"
JPEG (VGA or QVGA): 30 fps
The refresh interval may be longer depending on a net-
work environment, PC spec, photographic subject,
access traffic, etc.
Step 1
Start up the web browser.
Step 2
Enter the IP address designated using the Panasonic IP
setup software in the address box of the browser.
Example: http://192.168.0.10/
Important:
• When the HTTP port number is changed from "80",
enter "http://IP address of the : (colon) +
port number" in the address box of the browser, for
example, "http://192.168.0.11:8080".
• Configure the web browser to not use the proxy
server.
Step 3
Press the [Enter] key on the keyboard.
→
The "Live" page will be displayed.
The following are descriptions of how to monitor images from the camera on a PC.
Monitor images from a single camera