15
Audio Volume Control
Video Adjustment and Setup
By pressing the + or – button during picture display, you can adjust the audio volume level. While the + or – button is pressed,
the volume level is displayed on the screen.
–:
Audio volume level goes down.
+:
Audio volume level goes up.
■
Video Adjustment (Video Input,
S-Video Input)
Setup of this monitor will be performed in the VIDEO
ADJUST menu.
Note:
• The menu title display differs depending on the selected
input signal. Before adjustment, press the INPUT
SELECT button surely to select the input signal. (Refer to
p. 13.)
• If the power is shut down during setup, the setting val-
ues will not be saved.
1. Press the MENU button. The top menu will be displayed.
2. Move the cursor to VIDEO ADJUST by pressing the
C
or
D
button. Press the MENU button.
The VIDEO ADJUST menu will be displayed.
Present input signals are displayed in the menu title.
For video input (A):
VIDEO A
For video input (B):
VIDEO B
For S-video input:
S-VIDEO
To the right side of the menu title, the input signal type is
displayed as specified below.
NTSC:
When a video signal input of the NTSC system is
entered or if there is no signal
PAL:
When a video signal input of the PAL system is
entered
Setting item
Effect
Setting value
VOLUME
+:
Audio volume level goes up.
–:
Audio volume level goes down.
0 to +40
V I D E O A D J U S T
P C S E T U P
L A N G U A G E
E X I T
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
TINT
H-POSITION
COLOR TEMP
SCAN
NORMAL SETTINGS
EXIT
VIDEO B IN
NTSC
6500K
FULL
00
00
00
00
00
00
VOLUME
22
