9
Precautions
The following points as well as the con-
tents of "Warning" and "Caution" shall be
observed.
Refer installation work to the dealer.
Installation work requires technique and experi-
ences. Otherwise injury, or damage to the
product may result.
Be sure to consult the dealer.
Do not insert objects inside the product.
If water or metallic items enter the product, it
may cause fire or electric shock.
Turn the power off immediately and contact
qualified service personnel for service.
Do not attempt to disassemble or modify
the product.
Failure to observe this may cause fire or elec-
tric shock.
Consult the dealer for the repair or inspections.
Stop operation immediately when some-
thing is wrong with the product.
When smoke goes up from the product or the
smell of smoke comes from the product, con-
tinued use will result in fire, injury, or damage to
the product.
Turn the power off immediately and contact
qualified service personnel for service.
Select an installation area that can sup-
port the total weight.
Selecting an inappropriate installation surface
may cause the product to fall down or topple
over, resulting in injury.
Installation work shall be started after sufficient
reinforcement.
Periodic inspections shall be conducted.
Rust on the metal parts or screws may cause
the product to fall down resulting in injury.
Consult the dealer for the inspections.
This product shall be installed in a vibra-
tion-free place.
Failure to observe this may cause screws and
bolts to be loosened and consequently to fall
resulting in injury.
Install this product in a location high
enough to avoid people and objects from
bumping the product.
Failure to observe this may cause a drop
resulting in injury or accidents.
Do not strike or give a strong shock to this
product.
Failure to observe this may cause injury or fire.
Turn the power off when do wiring of this
product.
Failure to observe this may cause electric
shock. A short circuit or wrong wiring may
cause fire.
Do not use the product in an atmosphere
of flammable gases.
Failure to observe this may cause injury by
explosion.
Avoid installing the product in locations
where it is subject to damage by salt or
corrosive gas.
Otherwise the mounting fixtures will deterio-
rate, causing the product to fall down and
leading to accidents.
Use the specified mount bracket.
Failure to observe this may cause a drop
resulting in injury or accidents.
Do not rub the edges of metal parts with
your hand.
Failure to observe this may cause injury.
Tighten screws and mounting fixtures to
the specified torque.
Failure to observe this may cause a drop
resulting in injury or accidents.
