16
Using a two-gang junction box (locally procured)
• When the camera is installed using the two-gang junction box, mount the attachment plate
(accessory) to the embedded box installed on the wall or ceiling as a first step.
Note:
• For wall mounting:
Installation shall be performed in such a manner that " TOP" of the attachment plate faces
upward.
•
For ceiling mounting:
The front side (model number indication face) of the camera shall be aligned in the direction of
the arrow in " FRONT" on the attachment plate.
Using the camera mount bracket (accessory)
• When installing the camera with the camera mount bracket, attach the camera mount bracket
to the wall or ceiling in the first place. (
+
next page.)
Mount the attachment plate (accessory) by using the screws supplied with mount bracket.
(
+
next page.)
(Recommended tightening torque: 0.78 N·m)
Note:
• When installing the camera on the wall or ceiling where cable holes are already provided, or
when installing the camera with exposed wiring, the mount bracket shall be used.
• The female thread for conduit is compliant with ANSI NPSM (parallel pipe threads) 3/4 or
ISO 228-1(parallel pipe threads) G3/4.
Cap for the female thread for the conduit shall be removed with a hexagon wrench.
• To connect conduit from the top, refer to page 19.
46 mm
83.5 mm
[Mounting position on wall or ceiling]
Attachment plate (accessory)
Two-gang junction box
FRONT
TOP
FRONT
TOP
