26
Joystick up/down operation reversal setting
When tilting the camera set in the PC software by operating the joystick, the setting of whether to make the direction of operation
opposite to the direction of movement of the camera image (up/down) is made as follows.
• When this setting is Off (not reversing), the direction of moving the joystick will be the same as the direction of movement of
the camera image.
• When this setting is On (reversing), the direction of moving the joystick will be opposite to the direction of movement of the
camera image.
Operation procedure
1
Select “U/D Reverse” from the menu
The current joystick up-down operation reversal setting is
displayed.
Initial value: Off (Not reversing)
2
Press
The joystick up/down operation reversal setting screen is
displayed.
3
With
or
change the joystick up/down
operation reversal On/Off
4
Press
The settings confirmation screen is displayed.
5
Press
The settings registration screen is displayed for a few
seconds.
After that, the set value is stored, and the screen returns to
that of Step 1.
Main unit settings
(continued)
Joystick left/right operation reversal setting
When panning the camera set in the PC software by operating the joystick, the setting of whether to make the direction of
operation opposite to the direction of movement of the camera image (left/right) is made as follows.
• When this setting is made Off (not reversing), the direction of moving the joystick will be the same as the direction of move-
ment of the camera image.
• When this setting is made On (reversing), the direction of moving the joystick will be opposite to the direction of movement of
the camera image.
Operation procedure
1
Select “L/R Reverse” from the menu
The current joystick left/right operation reversal setting is
displayed.
Initial value: Off (Not reversing)
2
Press
The joystick left/right operation reversal setting screen is
displayed.
3
With
or
change the joystick left/right
operation reversal On/Off
4
Press
The settings confirmation screen is displayed.
5
Press
The settings registration screen is displayed for a few
seconds.
After that, the set value is stored, and the screen returns to
that of Step 1.
