17
Before Operation
(continued)
8
Press
The screen for inputting the key for communication with the
connected destination is displayed.
When the administrator passwords input in Step 5 and Step
7 are different from each other, the error message “Passwd
Mismatch” is displayed for a few seconds, and then the
display returns to the screen of Step 2.
9
Enter the key for communication with the
connected destination using the numeric buttons
The key for communication with the connected destination
can be set within the range of values “00000000” to
“99999999” (8 numeric digits).
Press
The settings confirmation screen is displayed.
Press
The settings registration screen is displayed for a few
seconds.
After that, the display changes to the Login awaiting screen.
Login (administrator)
Log in using the administrator ID and password registered at the time of initial registration.
1
Once the initial registration is completed, the login
awaiting screen is displayed
2
Press
The user ID input screen is displayed.
Note:
• It is also possible to input the user ID immediately
using the numeric buttons after Step 1.
3
Enter the user ID using the numeric buttons
Input here the administrator ID that was registered as the
user ID at the time of initial registration.
The user ID that has been input is displayed.
4
Press
The password input screen is displayed.
5
Enter the password using the numeric buttons
Input here the administrator password that was registered as
the password at the time of initial registration.
The digits of the password that have been input are
displayed as asterisks “
＊
”.
6
Press
The login successful message “Login OK” is displayed for a
few seconds and the unit goes into the logged-in state.
When you have input a wrong user ID or password, blinking
display is made of the message “Invalid” for a few seconds,
and then the display returns to the login awaiting screen.
