background image

22

When "ON" is selected, the zoom factor and the panning/tilting settings can be configured. 
Follow the procedure below.

      **

EL-ZOOM

**

 PUSH SET

      PUSH SET

      **

EL-ZOOM

**

PUSH SET

PUSH SET

      **

EL-ZOOM

**

PUSH SET

PUSH SET

ZOOM

PAN/TILT

ZOOM

PAN/TILT

ZOOM

PAN/TILT

 U ZOOM D

U ZOOM D L PAN R

“SYSTEM SETUP” screen

EL-zoom setting screen 

Pan/tilt setting screen

Zoom setting screen

 RET TOP END

 RET TOP END

 RET TOP END

 

OFF

    **SYSTEM SETUP** 

SYNC          INT

PRIVACY ZONE

STABILIZER    OFF

EL-ZOOM       ON

UPSIDE-DOWN   OFF
 

 -     +

LDC           I......  0

 RET TOP END

Step 1

Move the cursor to "EL-ZOOM", select "ON" and press the [SET] button. 

 The "EL-ZOOM" setting screen will be displayed. 

Step 2

Move the cursor to "PUSH SET" of "ZOOM" and press the [SET] button. 

 The zoom setting screen appears. 

Step 3

Adjust the angular field of view by changing the electronic zoom factor (up to 2x) using the [UP] 
or [DOWN] button, and press the [SET] button. 

Note:

  •  When the zoom f

actor is incremented, resolution will be deteriorated. 

Step 4

Move the cursor to "PUSH SET" of "PAN/TILT" and press the [SET] button. 

 The pan/tilt setting screen appears. 

Step 5

Use the [UP], [DOWN], [RIGHT], and [LEFT] buttons to determine the position of the area to be 
set and press the [SET] button. 
The position can be changed in the range of zoom factor set in the "ZOOM" setting screen. 

D

 Upside-down setting [UPSIDE-DOWN] 

ON:  The video image can be reversed upside down. 
OFF (default):  The video image cannot be reversed upside down.

E

 Lens distortion correction [LDC]

The image may be distorted depending on the lens used and the zoom factor. By adjusting the 
lens  distortion  correction  setting,  the  distorted  image  can  be  converted  to  match  the  square 
monitor and achieve effects desired by the user. 

Note:

  •   Depending on the lens used, complete correction may not be achieved. 

Summary of Contents for WV-CP300 Series





























Reviews: