background image

13

Note:

  •  When "SENS UP" is set to the AUTO mode, “AGC” cannot be set to “OFF”.

5

 Electronic sensitivity enhancement setting [SENS UP]

Use  of  the  electronic  sensitivity  enhancement  function  increases  the  light  sensitivity  of  the 
CCD, and accordingly the image becomes brighter. The magnification is unchanged for selec-
tion of FIX, and the magnification is automatically adjusted in accordance with the illuminance 
of a photographic subject for selection of AUTO. The magnification of the electronic sensitivity 
is selectable from the following. 
OFF  (default)/X2  AUTO/X4  AUTO/X6  AUTO/X10  AUTO/X16  AUTO/X32  AUTO/OFF/X2  FIX/X4 
FIX/X6 FIX/X10 FIX/X16 FIX/X32 FIX/X64 FIX/X128 FIX/X256 FIX/X512 FIX

Note:

  •  When "ALC/ELC" is set to "ELC" or "ALC+", only the AUTO mode is enabled.  
  • 

When  "SHUTTER"  is  set  to  options  other  than  "OFF",  the  electronic  sensitivity  enhance-
ment setting cannot be performed and "---" appears.

  •  When  the  magnification  of  "SENS  UP"  is  increased,  the  screen  becomes  coarser,  more 

whitish, or more flawed. However, this phenomenon is normal.

6

 White balance setting [WHITE BAL] 

The white balance adjustment is selectable from the following.
ATW1 (default):  Activates the automatic color temperature tracking mode. 
 

The camera continuously check the color temperature of the light source and 
automatically adjusts the white balance. The adjustment of the color tempera-
ture ranges from approx. 2,700 K to 6,000 K.

ATW2:

 

Activates  the  sodium  lamp  automatic  color  temperature  tracking  mode.  The  camera 
automatically  achieves  an  optimal  white  balance  under  the  sodium  lamp.  The  adjust-
ment of the color temperature ranges from approx. 2,000 K to 6,000 K. 

 •  If the situation meets one of the followings, color may not be accurately reproduced. 

  •  The subject is mostly highly-colored. 
  •  The photographic scene is under the bright blue sky or at nightfall. 
  •  The illumination of the light illuminating the subject is insufficient.

When "AWC" is selected, follow the steps below to adjust the white balance.

"CAMERA SETUP" screen

    **CAMERA SETUP** 

SCENE1

 ALC/ELC     ALC    

 SHUTTER     OFF

 AGC         ON(HIGH)

 SENS UP     OFF

 WHITE BAL   ATW1

 DNR         HIGH

      AUTO1

 VMD

 RET TOP END

D&N(IR)

OFF

Summary of Contents for WV-CP300 Series





























Reviews: