12
Major operating controls and their functions
1
AC power input terminal [120 V~ 60 Hz]
<Only for WV-CP300, WV-CP310>
Connect with the supplied power cord.
2
Video output connector [VIDEO OUT]
Provides video output to system units.
3
Tripod
mount base
This is used to install the camera onto the
mount bracket (Iocally procured).
4
ALC lens connector
Connects to ALC lens (4-pin).
5
Back focus adjustment screw
Adjusts the back focus distance and
image focal length.
6
Power input terminal [12 V IN, 24 V~IN]
<Only for WV-CP304, WV-CP314>
The power supply of 24 V AC or 12 V DC is
connected to this terminal.
7
Setup button [SET]
Press the [SET] button once and the
"FOCUS ADJUSTMENT" screen will be
displayed.
Hold down the [SET] button for more than
2 seconds and the setup menu screen will
be displayed.
• [LEFT]/[RIGHT]: Press the [RIGHT] or [LEFT]
button to move to the right or left in the
menu, or change the displayed values.
• [UP]/[DOWN]: Press the [UP] or [DOWN]
button to move up or down in the menu.
(The directions of "UP", "DOWN",
"LEFT"and "RIGHT" are as shown when
you are directly facing "UP".)
• [SET]: Press this button in the menu to
confirm the selected value or function.
In addition, this button is used to open
submenus.
(Side view)
(Bottom view)
(Rear view)
<WV-CP304, WV-CP314>
<WV-CP300, WV-CP310>
4
5
UP
SET
7
2
1
3
120V~60Hz
VIDEO OUT
6
24V~IN 2-N
1-L
12V IN
VIDEO OUT
2
3
(UP) UP
(DOWN) SET
(LEFT)
(RIGHT)
PGQX1142YA_WV-CP300_G.indd 12
2012/3/30 16:53:34
Summary of Contents for WV-CP300 Series
Page 31: ...31 ...
