background image

2

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC 

SHOCK DO NOT OPEN

The lightning flash with 

arrowhead symbol, within an 

equilateral triangle, is intended 

to alert the user to the presence 

of uninsulated "dangerous 

voltage" within the product's 

enclosure that may be of 

sufficient magnitude to 

constitute a risk of electric 

shock to persons.

The exclamation point within an 

equilateral triangle is intended 

to alert the user to the presence 

of important operating and 

maintenance (servicing) 

instructions in the literature 

accompanying the appliance.

WARNING:

•  This apparatus must be earthed.

•  Apparatus  shall  be  connected  to  a  mains 

socket  outlet  with  a  protective  earthing 

connection.

•  The mains plug or an appliance coupler shall 

remain readily operable.

•  To prevent fire or electric shock hazard, do not 

expose this apparatus to rain or moisture.

•  The  apparatus  should  not  be  exposed  to 

dripping or splashing and that no objects filled 

with liquids, such as vases, should be placed 

on the apparatus.

•  All  work  related  to  the  installation  of  this 

product  should  be  made  by  qualified  service 

personnel or system installers.

•  The  connections  should  comply  with  local 

electrical code.

CAUTION:

An  ALL-POLE  MAINS  SWITCH  with  a  contact 

separation  of  at  least  3  mm  in  each  pole  shall 

be  incorporated  in  the  electrical  installation  of 

the building.

FOR YOUR SAFETY PLEASE READ THE 

FOLLOWING TEXT CAREFULLY.

WARNING: This apparatus must be earthed.

IMPORTANT

The  wires  in  this  mains  lead  are  coloured  in 

accordance with the following code.

 

Green-and-yellow: 

Earth

 

Blue: 

Neutral

 

Brown: 

Live

  As the colours of the wire in the mains lead of 

this  appliance  may  not  correspond  with  the 

coloured  markings  identifying  the  terminals  in 

your plug, proceed as follows.

  The wire which is coloured 

green-and-yellow 

must  be  connected  to  the  terminal  in  the  plug 

which is marked with the letter 

E

 or by the earth 

symbol      or  coloured 

green

  or 

green-and-

yellow

.

  The  wire  which  is  coloured 

blue

  must  be 

connected  to  the  terminal  in  the  plug  which  is 

marked with the letter 

N

 or coloured 

black

.

  The  wire  which  is  coloured 

brown

  must  be 

connected  to  the  terminal  in  the  plug  which  is 

marked with the letter 

L

 or coloured 

red

.

Turn  the  power  off  at  the  mains  to  disconnect  the 

main power for all unit.

We declare under our sole responsibility that the product 

to which this declaration relates is in conformity with the 

standards  or  other  normative  documents  following  the 

provisions of Directives 2006/95/EC and 2004/108/EC.

Wij  verklaren  als  enige  aansprakelijke,  dat  het  product 

waarop deze verklaring betrekking heeft, voldoet aan de 

volgende  normen  of  andere  normatieve  documenten, 

overeenkomstig  de  bepalingen  van  Richtlijnen  2006/95/

EC en 2004/108/EC.

Vi  erklærer  os  eneansvarlige  for,  at  dette  produkt,  som 

denne  deklaration  omhandler,  er  i  overensstemmelse 

med standarder eller andre normative dokumenter i følge 

bestemmelserne  i  direktivene  2006/95/EC  og  2004/108/

EC.

Vi deklarerar härmed vårt fulla ansvar för att den produkt 

t i l l   v i l k e n   d e n n a   d e k l a r a t i o n   h ä n v i s a r   ä r   i 

överensstämmelse  med  de  standarder  eller  andra 

normativa dokument som framställs i direktiv nr 2006/95/

EC och 2004/108/EC.

Ilmoitamme yksinomaisella vastuullamme, että tuote, jota 

tämä  ilmoitus  koskee,  noudattaa  seuraavia  standardeja 

tai  muita  ohjeellisia  asiakirjoja,  jotka  noudattavat 

direktiivien 2006/95/EC ja 2004/108/EC säädöksiä.

Vi  erklærer  oss  alene  ansvarlige  for  at  produktet  som 

denne  erklæringen  gjelder  for,  er  i  overensstemmelse 

med  følgende  normer  eller  andre  normgivende 

dokumenter  som  følger  bestemmelsene  i  direktivene 

2006/95/EC og 2004/108/EC.

Summary of Contents for WV-CP290/G






















Reviews: