9
To keep on using with stable performance
Parts of this product may deteriorate and it
may shorten the lifetime of this product when
using in locations subject to high temperatures
and high humidity. (Recommended operating
temperature: +35 °C or lower)
Do not expose this product to direct heat
sources such as a heater.
Handle this product with care.
Do not drop this product, nor apply shock or
vibration to this product.
Failure to observe this may cause trouble.
Do not touch the dome cover with your
bare hands.
A dirty dome cover causes deterioration of
picture quality.
Noise on monitor
This product is equipped with a super sensitive
CCD. Therefore, noise may appear on the
monitor. This phenomenon is not trouble.
Discoloration on the CCD color filter
When continuously shooting a bright light
source such as a spotlight, the color filter of
the CCD may have deteriorated and it may
cause discoloration. Even when changing the
fixed shooting direction after continuously
shooting a spotlight for a certain period, the
discoloration may remain.
Do not aim this product at strong light
sources.
A light source such as a spot light causes a
blooming (light bleeding) or a smear (vertical
lines).
Cleaning this product body
Turn the power off when cleaning this product.
Do not use strong abrasive detergent when
cleaning this product. Otherwise, it may cause
discoloration.
Synchronous mode setting
Image synchronous mode of this camera
indicates internal synchronization (INT) only. Set
the multiplexed vertical drive (VD2) as OFF
when the camera is connected to the system
controller of the company.
Blooming
Smear
Bright subject
