28
Blurred image
The temperature of power
cord rises or falls when the
power cord is bent or
stretched during use
Damaged power cord sheathing
Black line in image
No image displayed
Cause/solution
Reference page
Symptom
Troubleshooting
Before asking for repairs, confirm the causes with the following table.
Contact your dealer if a problem cannot be solved even after checking and trying the solution in the
table or a problem is not described below.
–
–
20-21
–
9
–
–
15-16
18
• Are the power cord and coaxial cable
connected appropriately?
→
Check whether the connection is
appropriately established.
• Is the adjustment monitor connected?
→
Confirm whether the monitor is con-
nected.
• Is the monitor brightness appropriately
adjusted, or is the contrast appropriately
adjusted?
→
Check whether the monitor settings are
appropriate.
• Is the cushioning material in the spherical
cover removed?
→
Confirm whether the cushioning
material has been removed.
• Is the spherical cover dirty or damaged?
→
Verify the state of the spherical cover.
• Is the focus adjusted correctly?
→
Check if the focus is adjusted correctly.
• Is the lens of the camera soiled with dirt or
dust?
→
Check whether the lens of the camera is
clean.
• Is the connected system controller set to
multiplexed vertical drive (VD2)?
→
Check whether the connected system
controller is set correctly.
• The power cord or connector is damaged.
Continuous use of the damaged cord or
connector may cause electric shock or
fire.
Turn off the power supply immediately and
request repair from your dealer.
Heated portion of power line
consisting of power cord and
connector during use
