INSTALLATION
Important Notices:
• The following installation should be made by qualified service personnel or system installers
and should conform to all local codes.
• Be sure to use a wall board having enough strength to support this camera.
• Do not use the camera at a place where it may be exposed to oil splashes.
Oil can cause cracks in the part where the camera is mounted.
Mounting the camera (by leading the cables through a hole in the wall)
To make a hole for the cables in the wall where the camera is to be installed, proceed as follows:
15mm (9/16”)
50mm (2
”)
To AC Adapter
To Video Input
3. Pass the cables through the cable hole.
4. Connect the cables as shown in the dia-
gram.
5. Mount the camera onto the wall by fixing it
with the mounting screws.
Note:
To monitor images in upright position,
confirm that the cable outlet is up as
shown in the diagram before fixing the
camera with the screws.
6. Attach the panel cover. Make sure that the
cover is closed firmly and that the camera
wires are not caught.
1. Determine the place on the wall where you
want to install the camera. Then make a
hole (approx.
φ
15 mm) in the wall referring
to the diagram above.
2. Detach the panel cover by pressing it at
the top and bottom as shown in the dia-
gram.
All manuals and user guides at all-guides.com