INSTALLATION OF OPTIONAL LENS
To install the optional lens, follow the procedure shown below.
Cushioning Ring
Lens
1. Detach the cover by pressing it at the top
and bottom as shown in the diagram.
2. Detach the camera by removing the four
screws shown in the diagram.
5. Remove the lens (originally mounted on
the camera) from the camera by turning it
counterclockwise.
6. Remove the lens cap from the optional
lens.
4. Install the camera with the brackets on the
base with two screws.
Caution:
Confirm that the camera is mounted
with the top up.
3. Place the brackets (provided as standard
accessory) on both sides of the camera
and tighten with the two screws.
Side view of the camera
Top
Cushioning Ring
Lens
7. Mount the optional lens onto the camera
by turning it clockwise as shown in the dia-
gram.
Cautions:
• Do not forget to install the cushioning
ring as shown in the diagram.
• Install only one cushioning ring bet-
ween the lens and the camera.
• When the WV-LXY18C4 optional lens
are installed in the WV-BF300 or WV-
CF400 camera, a picture with missing
corners will appear on the monitor
screen as shown below.
All manuals and user guides at all-guides.com
