15
Step 4
Move the cursor to "POSiTiON" and press the [SET] button.
Step 5
Press the [UP], [dOWN], [rigHT] and [LEFT] buttons to move to the upper-left part of the area
to be set, and press the [SET ] button.
Step 6
Press the [UP], [dOWN], [rigHT] and [LEFT] buttons to move to the lower-right part of the area
to be set, and press the [SET ] button.
7
Digital noise reduction function setting [DNR]
The digital noise reduction function reduces noise automatically under the condition of low illu-
minance.
The effect level of the noise reduction function is selectable from the following.
LOW: Low level of noise reduction (small residual image)
HIGH (default): High level of noise reduction (large residual image)
8
Black-and-white mode setting [D&N (ELE) ]
The settings relating to the black-and-white mode can be configured. Follow the procedure
below.
Step 1
Move the cursor to “d&N (ELE)” and select the mode from the following.
AUTO: Automatically switches between color and black-and-white images in accordance with
the illuminance, but does not have ir filter. The black-and-white mode is selected for
dark images. Use for area illuminated by halogen lamp. (mavelengh
800nm)
Switches to black-and-white images when brightness (illuminance) around the camera
is lower than approx. 0.1 lx.
OFF (default): displays color images.
Note:
• If a subject is always moving or the screen is occupied with a uniform color, brightness deter
-
mination may not be performed successfully because the brightness is merely determined by
information from the CCD image sensor.
• WV-CP344 and WV-CP354 cannot set the switching brightness (illuminance) level of color
images and black-and-white images.
• To obtain color images, a sufficient level of illuminance (approx. 30 lx or more) is required.
