background image

5

<WV-BWC4000E>

<For Europe>

• 

Declaration of Conformity (DoC)

“Hereby, Panasonic declares that the BWC (Body Worn Camera) is in compliance with the essential 
requirements and other relevant provisions of the Directive 2014/53/EU.”
Hint:
If you want to get a copy of the original DoC of our above mentioned products, please contact our 
web address: http://www.ptc.panasonic.eu
Authorised Representative:  Panasonic Testing Centre
 

Panasonic Marketing Europe GmbH

 

Winsbergring 15, 22525 Hamburg, Germany

Frequency band 

Maximum transmit power

Frequency Band(STA):

2412 MHz to 2462 MHz (1-11 ch) 

16 dBm

5500 MHz to 5580 MHz (100, 102, 104, 106, 108, 110, 112, 116 ch)  12 dBm
5660 MHz to 5700 MHz (132, 134, 136, 140 ch) 

12 dBm

5745 MHz to 5825 MHz (149, 151, 153, 155, 157, 159, 161, 165 ch)  8 dBm

Frequency Band(AP):

2412 MHz to 2462 MHz (1-11 ch) 

16 dBm

5745 MHz to 5825 MHz, (149, 151, 153, 155, 157, 159, 161, 165 ch)  8 dBm

Frequency Band(Bluetooth LE):

2402 MHz to 2480 MHz 

6 dBm

• 

SAR (Specific Absorption Rates)

The highest SAR values for BWC (Body Worn Camera). When using this product, be sure to mount it 
using a compatible mount and align the lens surface with the desired direction.

Highest SAR (W/kg)   0.130

Summary of Contents for WV-BWC4000





























Reviews: