Panasonic Workio DP-C265, Operating Instructions Manual

Page: 46 / 102

46
Chapter 4 Fax/Email Settings
Fax Parameters
z The contents of Fax Parameter may differ depending on the each country’s regulation or specification.
No. Parameter Comments Selective Item Standard
Setting
0 - 39 00 Print FaxParameterList Print the Fax Parameter List.
To cancel printing the fax
parameter list, press “
Stop ” and
“ OK ”.
While processing the
cancellation, panel operation is
denied, and an error beep is
produced.
The feeding paper(s) will be
ejected before completing the
above cancellation operation.
If setting a parameter, an asterisk
mark (*) will be added before the
parameter number.
Stop, Start Start
01 Density (HOME) Set the default density according
to the most-used original. -3, -2, -1, 0, 1, 2, 3 0
02 Resolution (HOME) Set the default resolution
according to the most-used
original.
z When installing the optional
Fax Communication Board, the
standard setting can be
changed.
STD, Fine, S-Fine Fine
03 Original (HOME) Set the default of original type
according to the most-used
original. Text,
Txt/Pht (Text/Photo),
Photo Text
04 Stamp (HOME) When set to “ On ”, all successfully
transmitted originals are stamped
(Memory or Direct transmission).
In order not to stamp the memory
transmitted originals, set “
28
Stamp At Memory XMT ” to
“ Invalid ”.
Off, On Off
05 Memory (HOME) Set the default for Memory
transmission.
When set to “
Off ”, originals are
transmitted directly without being
stored into memory first.
Off, On On
06 Dialling Method Select a dialling method
according to your telephone line.
z This feature is available in
certain countries only.
Tone, Pulse Tone