Panasonic Workio DP-C262, Function Manual

Page: 38 / 82

38
Chapter 4 Fax/Email Settings
80-119 82 Quick Memory XMT Enable or disable the quick
memory transmission function.
• Invalid
Transmission starts after all
originals are scanned.
• Valid
Transmission starts when the first
page has been scanned from the
ADF into memory. If there is
more than one destination,
however, quick memory
transmission will not work.
z
For details about quick
memory transmission, refer to
Transmitting a Document
Stored in Memory
in the
Operating Instructions (For
Facsimile and Internet Fax) on
the provided CD-ROM.
Invalid, Valid Valid
86 Ringer Volume Set the ringer volume.
Setting it to “
Off ” puts the ringer
on mute
Off, Soft, Medium,
Loud Soft
89 List Output Tray Select an output tray for a
printed list.
z
Outer is available when the
optional Paper Transport Unit
is installed.
Inner, Outer Inner
95 Duplex Print Enable or disable the duplex
printing of a received original.
z For details about the duplex
printing of a received original,
refer to
Print Reduction in the
Operating Instructions (For
Facsimile and Internet Fax) on
the provided CD-ROM.
Invalid, Valid Invalid
97 Special Tray Select a Special Tray that will not be
used for printing received faxes
(Tray 1 - 4). One Tray must always
be available for receiving Faxes.
z You can specify one Tray (1 - 4) for
each selection No.1, 2 and/or 3.
Ex :
Exclude Tray 1 if color paper
is loaded on Tray 1.
NO. 1, NO. 2, NO. 3,
(None, Tray1, Tray2,
Tray3, Tray4) None
99 Memory Size Display the status of optional
memory card.
(Base Optional
Memory)
Fax Parameters
No. Parameter Comments Selective Item
Standard
Setting