Panasonic Workio DP-C262, Function Manual

Page: 12 / 82

12
Chapter 2 General Settings
0-19 15 Sleep Timer If you do not select any key within a given
time period, the machine is switched to
sleep mode automatically. None,
1 to 240 (min.) 22 (min.)
16 Language Sel.
Priority Set whether to give priority to the display
language. Off, On Off
17 Language Default Set the display language.
If the language is changed, the system
automatically returns to the initial function
setup screen. English,
C. French,
Spanish English
18 Panel Beep
Sound Set the volume of Beep Sound when the
panel is selected. Off, Soft, Loud Soft
19 Original Set Beep
Sound Set whether to sound a confirmation tone
when the original is placed on the Platen
Glass.
z
The volume level is the same as for
Panel Beep Sound.
z When “ 18 Panel Beep Sound ” is set to
“ Off ”, the machine makes no sound.
No, Yes No
20-39 20 Orig. Set In ADF
Sound Set whether to sound a confirmation tone
when the original is placed on the ADF.
z The volume level is the same as for
Panel Beep Sound.
z
When “ 18 Panel Beep Sound ” is set to
“ Off ”, the machine makes no sound.
No, Yes Yes
21 Dept. Counter
Mode Set whether to display departmental
counters, limit counters, and total counters. z Consult with the authorized
Panasonic dealer on how to use
this item.
22 Date Time Setting Set the date and the time. Month, Day, Year,
Time
23 Weekly Timer Set the weekly On/Off timer using the
Keypad of the machine. At the selected
time, the machine will be changed to/from
sleep mode. Each day of the
week. Off
24 Daylight Time Set Daylight Time. No, Yes Yes
25 DHCP Default Select “ Yes ” when your network
environment is based on DHCP Server.
When using this machine as a network
shared printer, select “
No ” and set “ 26
TCP/IP Address ”, “ 27 TCP/IP Subnet
Mask ”, and “ 28 TCP/IP Default Gateway ”.
No, Yes Yes
26 TCP/IP Address Set the IP address. 3-digit x 4 0. 0. 0. 0
No.25 to 26
After setting, turn the machine's power switch Off,
and then On again.
Key Operator
No. Parameter Comments Selective Item
Standard
Setting