44
Making Copies
Other Features
■
Skyshot Mode
Skyshot allows copying a manuscript without generating dark borders even if the Platen Cover or ADF is opened.
Two types of Skyshot modes can be selected;
Digital Skyshot Mode : The scanning area (size) is not pre-determined.
Manual Skyshot Mode: The scanning area (size) is pre-registered into memory (M1 and M2) in advance.
■
Digital Skyshot Mode
The default setting of Digital Skyshot Mode is “NORMAL”. This
default setting can be changed in the Copier Settings.
(See page 57)
1
Open the ADF more
than 45 degrees
wide.
From Platen
Upper-
Left
Corner
1
■
Manual Skyshot Mode
Enable the Copier Settings, Parameter No. 08 (MANUAL
SKYSHOT) first. (See page 57)
NOTE
●
Other jobs requiring memory cannot be performed, while M1 and
M2 buttons are being used for the Skyshot mode.
NOTE
The default setting of Digital Skyshot Mode is “NORMAL”. In this
setting, the unit scans once. If there are black areas around the
borders in the copies, set the Digital Skyshot Mode to “QUALITY”
to soften the dark borders. In this setting, the unit scans twice.
OFF
: NONE
NORMAL
: Default setting (usually select this mode).
QUALITY
: For better definition, select the Quality mode.
●
The final copy may be affected if colored background original(s)
do not have a white edge or if it is less than 2 mm wide.
The default setting of Digital Skyshot Mode should be set to
“OFF” in the Copier Settings, Parameter No. 07 (DIGITAL
SKYSHOT).
Summary of Contents for Workio DP-8016P
Page 85: ...memo...
