Panasonic WORKIO DP-150, Service Manual

Page: 87 / 136

5-6
(To be continued)
C00 Adjusting horizontal ratio Adjustment of the horizontal ratio 0
for full size copying
0.1% (-9 to +9)
C01 Adjusting vertical ratio Adjustment of the vertical ratio for 0
full size copying
0.1% (-9 to +9)
C02 Adjusting copy ratio Adjustment of the copy ratio 7
0.1% (-9 to +9)
C04 Original registration Adjustment of original registration 0
detecting timing detection timing
0.2mm (-30 to +30)
C05 Paper registration Adjustment of delay time for the 0
detecting timing registration roller clutch ON
0.25mm (-30 to +20)
C07 Registration void of image Adjustment of registration void 0
0.425mm (-0 to +99)
C08 Trail edge timing of original Adjustment of black line 0
(–: Ad: Delayed)
0.5mm (-9 to 0)
C09 Trail edge timing of copy Adjustment of black line at enlargement 0
(–: Ad: Delayed)
0.425mm (-9 to +15)
C10-C16 (Reserved)
C17 Grid standard voltage Adjustment of the standard voltage 0
1.67V (+99 to -17)
C19 Bias standard voltage Adjustment of the standard voltage 0
(developing) 1.67V (+99 to -29)
C22 Transfer electric current Adjusting values for C40 0
(A4/LETTER)
C23 Transfer electric current Adjusting values for C40 0
(A5/INVOICE)
C24 Transfer electric current Adjusting values for C40 0
(B5)
C25 (Reserved)
C31 Fuser temperature Adjustment of fuser temperature 0
0.7 ˚C/step
+: Raise the set up temperature.
–: Lower the set up temperature.
C35 Toner level detecting value 0.02V (-14 to +20) 0
C36 Toner level detecting value 0.02V (-50 to +50) 0
correction
4. F6 : Adjustment and programming
* The missing code number is [Not Used].
Code Item Functions Default
1
2