Panasonic WJRT416 - 16CH DIGITAL RECORDER Addendum Manual Download Page 6

2. Move the cursor to a position to be edited by perform-

ing either of the following:

• Move the 3D joystick controller to the right or left.
• Rotate the shuttle ring clockwise or counterclock-

wise.

3. Enter the desired date and time by performing either of

the following:

• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.

4. Press the PLAY/PAUSE button. The image with the

specified date and time will be played back on the
active monitor.
After the image has been played back, the LCD will
return to the default status.

3. Enter the camera number, search start date and time,

and search end date and time.

4. A list appears in accordance with the entered informa-

tion. Select an item from the list, and press the CAM
(SET) button.

5. The selected video is played back. 

6

WJ-RT416 SERIES CONTROL (PS·DATA)

The recorder control details are described in the WV-
CU950 / WV-CU650 Operating Instructions.
However, when the system controller (WV-CU950 / WV-
CU650) is connected to the recorder via the matrix switcher
(WJ-SX150 Series), the following differences will occur.

Function Only Available with
WJ-RT416 Series

The following functions are available only when the system
controller (WV-CU950 OR WV-CU650) is connected to the
WJ-RT416 series via the matrix switcher (WJ-SX150 Series).

Time & Date Search Playback

You can search playback images by entering a desired
recording date and time.

Note:

To cancel the entry, press the MON (ESC) or EXIT

button. The LCD display will return to the normal status.

1. Press the SEARCH/T & D SEARCH button while holding

down the SHIFT button. The time-and-date entry form
will appear on the LCD.

Mmm/DD/YYYY HH:MM 12

Mar/17/2004 12:00 AM

List Search

1. Activate the recorder mode. 
2. Press the SEARCH button during the Time & Date

Search screen, then List Search screen appears.

List Search

01

Camera No.

Off

Filtering

10-21-2006 11:30:30

Start

OK

Cancel

Month-Day-Year

10-22-2006 11:30:30

End

Month-Day-Year

[SEARCH]:Time & Date Search

Prev

Next

Return

Search List

Cam Quality

Start

08
07
06
05
04
03
02
01

SF
FQ
SF
NQ
EX
SF
FQ
SF

01-24-2006
01-24-2006
01-24-2006
01-24-2006
01-24-2006
01-24-2006
01-24-2006
01-24-2006

10:43:22
10:43:22
10:43:22
10:43:22
10:43:22
10:43:22
10:43:22
10:43:22

01-24-2006
01-24-2006
01-24-2006
01-24-2006
01-24-2006
01-24-2006
01-24-2006
01-24-2006

10:53:22
10:53:22
10:53:22
10:53:22
10:53:22
10:53:22
10:53:22
10:53:22

End

Page 001/002

Mmm/DD/YYYY HH:MM 12

Mar/17/2004 12:00 AM

Summary of Contents for WJRT416 - 16CH DIGITAL RECORDER









Reviews: