9
Panasonic System Solutions
HDE300_SATAConversionGuide_B
WJ-HDE300 S-ATA conversion guide
Maintenance guide
(28) Fix two HDD fan assemblies with one screw each, and
connect each HDD fan connector to the main board.
(29) Attach the cord clamp to the HDD3, 4 fan assembly and
secure the HDD3, 4 S-ATA cables, as shown right.
(30) Install new HDDs on the HDD mounting brackets with four screws each. Refer to the "Operating Instructions" for detail.
Notes:
When disconnecting the ATA cables, pull the pull-ring slowly and straightforward.
S-ATA HDD's do not require jumper configuration.
Install the HDD, board side facing down and the connectors pointing toward the front.
Take care not to deform the dampers when installing the HDD.
(31) Install the HDD unit in the reverse order of the removal.
モード
RAID5
復帰
切
入
HDD
電源
HDD Fan Ass'y
HDD Fan Connector
Main board
Clamp
