manualshive.com logo in svg

Panasonic WJHD309A - DIGITAL DISK RECORDER, Operating Instructions Manual

The Panasonic WJHD309A DIGITAL DISK RECORDER is a high-performance device designed to meet your surveillance needs. With impressive specifications and advanced features, this recorder ensures top-notch video quality and reliable performance. For a seamless user experience, download the comprehensive manual for free from manualshive.com, providing detailed instructions and helpful insights.

Share
Download
background image

150

n

Select a recording area using the arrows button  (

C D

A B

), and assign the disk space to the selected

recording area by rotating the jog dial.
Repeat this operation to assign disk space to two or
more recording areas.

m

Press the SET button after setting.

[Screenshot 5]

The confirmation dialog window will be displayed.

,

Move the cursor to "EXECUTE" using the arrows button
(

A B

) and press the SET button.

→

Mirroring will start and the "TOP MENU" of the "HDD
DISK MENU" will be displayed.

● 

Cancel mirroring (MIRROR OFF)

Do the following to cancel the mirroring function.

z

Turn on the power of this unit.
An image saying that the system check has been com-
pleted will be displayed.
Press the SET button after the image is displayed.

Note:

When the hard disk is replaced or removed, the

"TOP MENU" of the "HDD DISK MENU" will be auto-
matically displayed.

[Screenshot 1]

The "TOP MENU" of the "HDD DISK MENU" will be dis-
played.

x

Move the cursor to "MIRROR OFF" using the arrows but-
ton (

A B

) and press the SET button.

[Screenshot 2]

The password entry window will be displayed.

c

Enter the password for an administrator by rotating the
jog dial.
The camera selection buttons ([1] - [10/0] for the WJ-
HD316A, [1] - [9], [0] for the WJ-HD309A) are available
to enter numbers for password.
The same method is used to enter, insert and delete
characters as for attaching text information to images.
Refer to page 58.

v

Move the cursor to "EXECUTE" using the arrows button
(

C D

) and press the SET button.

[Screenshot 3]

The confirmation dialog window will be displayed.

b

Move the cursor to "OK" using the arrows button (

A B

)

and press the SET button.

→

Mirroring will be canceled.

Note:

One of the two hard disks involved in mirroring

will be indicated as "ADD (capacity)" on the "TOP
MENU" of the "HDD DISK MENU" after canceling the
mirroring function.

● 

Hard disk recovery (MIRROR ON)

Do the following to recover the hard disk when one of the
hard disks involved in mirroring is damaged while mirroring,
or when one of the hard disks is replaced.
By completing the following procedures, recovery of the
hard disk will start when the unit is in operation after the
HDD DISK MENU is closed.

z

Turn on the power of this unit.
An image saying that the system check has been com-
pleted will be displayed.
Press the SET button after the image is displayed.

Digital Disk Recorder

WJ-HD300A

HDD DISK MENU
   DISK CANDIDATE FOR A FORMAT      MIRROR AREA SETUP

110GB

HDD Total  capacity:160GB

00GB

Copy area

00GB

Free area

30GB

Normal area

Event area

RETURN: [SETUP/ESC] OK : [SET]

EXECUTE

CANCEL

Starting mirror format of HDDs 
in main unit, and all of data 
in HDDs are going to be erased.

Digital Disk Recorder

WJ-HD300A

HDD DISK MENU
TOP MENU    

FORMAT

MIRROR ON

REMOVELINK

RESTART

EXIT

MIRROR OFF

Information of recording areas : [SETUP/ESC] OK : [SET]

160GB

160GB 

160GB 

160GB 

*(160GB)

ADD (160GB)

160GB 

LOST

MAIN

EXT1

EXT2

EXT3

EXT4

EXT5

EXT6

EXT7

160GB

160GB 

160GB 

160GB 

*(ERROR)

ADD (ERROR)

160GB 

-

160GB 

160GB 

160GB 

160GB 

160GB 

160GB 

-

160GB 

160GB 

160GB 

160GB 

160GB 

160GB 

-

1

2

3

4

Digital Disk Recorder

WJ-HD300A

HDD DISK MENU
TOP MENU    

FORMAT

MIRROR ON

REMOVE LINK

RESTART

EXIT

MIRROR OFF

160GB M

160GB 

160GB 

160GB 

*(160GB)

ADD (160GB)

160GB 

LOST

MAIN

EXT1

EXT2

EXT3

EXT4

EXT5

EXT6

EXT7

160GB M

160GB 

160GB 

160GB 

*(ERROR)

ADD (ERROR)

160GB 

-

160GB 

160GB 

160GB 

160GB 

160GB 

160GB 

-

160GB 

160GB 

160GB 

160GB 

160GB 

160GB 

-

1

2

3

4

Information of recording areas : [SETUP/ESC] OK : [SET]

Enter the password.

EXECUTE

CANCEL

Digital Disk Recorder

WJ-HD300A

HDD DISK MENU
TOP MENU    

FORMAT

MIRROR ON

REMOVE LINK

RESTART

EXIT

MIRROR OFF

Information of recording areas : [SETUP/ESC] OK : [SET]

160GB M

160GB 

160GB 

160GB 

*(160GB)

ADD (160GB)

160GB 

LOST

MAIN

EXT1

EXT2

EXT3

EXT4

EXT5

EXT6

EXT7

160GB M

160GB 

160GB 

160GB 

*(ERROR)

ADD (ERROR)

160GB 

-

160GB 

160GB 

160GB 

160GB 

160GB 

160GB 

-

160GB 

160GB 

160GB 

160GB 

160GB 

160GB 

-

1

2

3

4

OK

CANCEL

Mirror "OFF" in main unit.

Summary of Contents for WJHD309A - DIGITAL DISK RECORDER























































































































































































Reviews:

No comments

Related manuals for WJHD309A - DIGITAL DISK RECORDER

ProVisual DVRM-5004 User Manual preview
DVRM-5004
Brand: ProVisual Pages: 29
ZMODO ZMD-DC-SBN6 User Manual preview
ZMD-DC-SBN6
Brand: ZMODO Pages: 28
MOB MO8955 User Manual preview
MO8955
Brand: MOB Pages: 23
BAICHUAN 5400C Series User Manual preview
5400C Series
Brand: BAICHUAN Pages: 67
Messoa DVR200 Series User Manual preview
DVR200 Series
Brand: Messoa Pages: 73
Abus TVVR35002 User Manual preview
TVVR35002
Brand: Abus Pages: 66
Infinite Play TINF4.POE User Installation And Operation Manual preview
TINF4.POE
Brand: Infinite Play Pages: 32
Hitachi HDR081 Instruction Manual preview
HDR081
Brand: Hitachi Pages: 38
Oz Security Systems N6 1U series Quick Start Manual preview
N6 1U series
Brand: Oz Security Systems Pages: 28
Delton DVR Simplified Manual preview
DVR
Brand: Delton Pages: 26
Winnov CBOX User Manual preview
CBOX
Brand: Winnov Pages: 62
Genie CCTV SDDVR Installation & User Manual preview
SDDVR
Brand: Genie CCTV Pages: 26
Jazz DV140 User Manual preview
DV140
Brand: Jazz Pages: 29
Jazz HDV102 Instruction Manual preview
HDV102
Brand: Jazz Pages: 40
Storm SMART DVR Quick Start Manual preview
SMART DVR
Brand: Storm Pages: 7
3r-global STANDARD 16 User Manual preview
STANDARD 16
Brand: 3r-global Pages: 71
Street Guardian Sgzc12sg User Manual preview
Sgzc12sg
Brand: Street Guardian Pages: 22
Street Guardian SG9663DCPRO User Manual preview
SG9663DCPRO
Brand: Street Guardian Pages: 29

Brands by name

Popular brands

Load more brands