16
Screenshot 3
The [Recording] button will be displayed in the [REC]
box.
Step 3
Start recording by clicking the [Recording] button.
• The REC indicator in the status display area will be
lit red when recording has started.
• Images from all cameras connected to this unit will
be recorded with the default settings.
• When images from cameras are currently recorded
with higher priority than manual recording, manual
recording will be suspended until that recording fin-
ishes.
Refer to the following for further information about
each recording mode.
Step 4
Click the [Stop recording] button to stop recording.
→
The REC indicator will go off.
Note:
• The REC indicator will continue to be lit when
recording in the other recording mode even though
the [Stop recording] button is clicked.
About the recording mode and the priority
There are 4 recording modes. Each recording mode and priority are as follows.
Recording Mode
Description
Priority
*1
Emergency recording
When an emergency event occurs, perform recording manually using
an external switch, etc..
Event recording
Perform recording manually at any event occurrence.
Manual recording
Start/stop recording manually.
Schedule recording
It is possible to perform recording automatically at a scheduled time on
a designated day of a week.
*1: These priorities are the default settings. (Emergency recording is the highest priority.)
*2: It is possible to change the priority for manual recording, schedule recording and event recording. Refer to a sys-
tem administrator for further information.
1
2
*2
3
*2
4
*2
Summary of Contents for WJHD309 - DIGITAL DISK RECORDER
Page 2: ...2...