Panasonic WJFS616 - SWITCHER, Operating Instruction

Page: 45 / 60

-43-
CLOSE OPEN
I R I S
LEFT RIGHT
UP
DOWN
HOME/SET
PRE-POSI
Press the TELE button to optically bring an object
closer. Pressing the WIDE button has the reverse
effect.
4. Press the IRIS buttons to close or open the lens
iris. Adjust the lens iris by using the buttons to
obtain the proper picture exposure.
By pressing both of these buttons at the same time,
the lens iris is reset to the initial factory settings.
2. Pan/Tilt Control (Manual Operation)
1. Select the desired camera referring to the Camera
Selection procedure described on page 42.
2. Press the Direction Arrow buttons to move the
pan/tilt head in the desired direction.
Pressing the
UP and RIGHT buttons will move the
pan/tilt head upwards and to the right.
Note: To move the pan/tilt head faster, press the
HOME/SET button while holding down the
Direction Arrow Buttons.
3. Pan/Tilt Control (Preset Operation)
The following functions are available only with cam-
eras that have preset panning functions, such as
the Panasonic WV-BS500 or WV-CS600 series.
Note: Select only preset position numbers 1 to 16.
1. Select the desired camera referring to the Camera
Selection procedure described on page 42.
2. Press the PRE-POSI button.
3. Press the CAMERA (1 - 16) buttons to select the
preset position number and move the pan/tilt head
to the preset position.
LEFT RIGHT
UP
DOWN
HOME/SET
** CAM SET UP **
CAMERA ID OFF
ALC/ELC ALC
SHUTTER ---
AGC ON
SENS UP OFF
SYNC INT
WHITE BAL AWC
MOTION DET ON
LENS DRIVE DC
END SET UP DISABLE
↵
↵
↵
↵
SET UP/ESC
4
8
12
16
3
7
11
15
2
6
10
14
1
5
9
13
CAMERA/PRESET POSITION
4. Auto Panning
The following function is available only when the
specified Pan/Tilt Head is used.
1. Select the desired camera referring to the Camera
Selection procedure described on page 42.
2. Press the AUTO button to activate the auto panning
function.
3. To cancel the auto panning function, press one of
the Direction Arrow Buttons.
5. Home Position Selection
The following functions are available only with cam-
eras that have preset panning functions, such as
the Panasonic WV-BS500 or WV-CS600 series.
1. Select the desired camera referring to the Camera
Selection procedure described on page 42.
2. Press the HOME/SET button to move the camera to
the home position.
6. Camera Setup
1. Select the desired camera referring to the Camera
Selection procedure described on page 42.
2. Press the SETUP/ESC button, while holding down
the selected CAMERA button, to access the
Camera Setup Menu.