background image

10

About HDD Unit

To install a hard disk drive in the recorder, it is necessary to assemble an HDD unit (encase the hard disk drive in the HDD canis-
ter).The HDD unit is designed to easily install/remove the hard disk drive in/from the recorder. 
Contact your dealer about purchasing, installing, and replacing the hard disk drives.

About Additional Camera Kit (option)

Number of cameras to be used in the system (64 cameras in basic system) can be increased to 96 and 128 (maximum) by pur-
chasing the Additional Camera Kit (WJ-NXE40, WJ-NXE40W: option). Refer to following table regarding camera numbers.

Additional Camera Kit 

WJ-NXE40, WJ-NXE40W

(license for 32 cameras)

NX400 only
(No additional license)

one Additional Camera Kit
(one additional license)

two Additional Camera Kit
(two additional licenses)

up to 64 cameras

up to 96 cameras

up to 128 cameras

Limitation of liability

THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING 
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR 
NON-INFRINGEMENT OF THE THIRD PARTY’S RIGHT.
THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS.
CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION 
AND/OR THE CORRESPONDING PRODUCT (S).

Introduction

 (continued)

Network security

As you will use this unit connected to a network, your attention is called to the following security risks.

  Leakage or theft of information through this unit

  Use of this unit for illegal operations by persons with malicious intent

  Interference with or stoppage of this unit by persons with malicious intent

It is your responsibility to take precautions such as those described below to protect yourself against the above network security risks.

•  Use this unit in a network secured by a firewall, etc.
•  If this unit is connected to a network that includes PCs, make sure that the system is not infected by computer viruses or 

other malicious entities (using a regularly updated anti-virus program, anti-spyware program, etc.).

•  Protect your network against unauthorized access by restricting users to those who log in with an authorized user name and 

password set by using user authentication.

•  Apply measures such as user authentication to protect your network against leakage or theft of information, including image 

data, authentication information (user names and passwords), alarm mail information, FTP server information and DDNS 
server information.

•  After the unit is accessed by the administrator, make sure to close the browser.
•  Change the administrator password periodically. Keep the authentication information (your user name and password) in a 

safe place free from public view.

•  Do not install the camera in locations where the camera or the cables can be destroyed or damaged by persons with malicious intent.

Summary of Contents for WJ-NX400K































Reviews: