manualshive.com logo in svg

Panasonic WJ-NX400G-54000T6, Operating Instructions Manual, Page: 43 / 224

Share
Download
Panasonic WJ-NX400G-54000T6 Operating Instructions Manual Download Page 43

43

Set up camera site alarm [Advanced camera site alarm setup]

Set up the action to be taken when a Panasonic alarm protocol received from a camera triggers camera site 
alarm.

Refer to the "Set up terminal alarm [Advanced terminal alarm setup]" section (

☞

 Page 42) for further informa-

tion about the items available for "Advanced camera site alarm setup"; "Mode" and "Alarm log", and also 
"Recording camera", "Preset" and "Terminal output" under "Setup by camera".

[Back] button

Click the button after completing the settings. The 
screen returns to the [Event setup] tab.

Note:

• If the event recording time (

☞

 Page 36) is 

shorter than alarm deactivation time set from the 
camera, the event recording may not be done for 
alarms which continuously occur.

Set up command alarm [Advanced command alarm setup]

Set up the action to be taken when a command alarm signal received from a PC that is connected via a net-
work protocol triggers command alarm.

Refer to the "Set up terminal alarm [Advanced terminal alarm setup]" section (

☞

 Page 42) for further informa-

tion about the items available for "Advanced command alarm setup"; "Mode" and "Alarm log", and also 
"Recording camera", "Preset" and "Terminal output" under "Setup by command number".

[Back] button

Click the button after completing the settings. The 
screen returns to the [Event setup] tab.

[Setup via recorder's main monitor]

Summary of Contents for WJ-NX400G-54000T6

































































































































































































































Reviews:

No comments