background image

44

45

When the face matching function is activated, it detects facial features of people in images, matches them 
against similar facial features recorded earlier or contained in live images, and issues an alarm when a match is 
found. 

Important:

  •  Face matching does not work while recorded images are being played or the setup window is displayed. 
  •  Face matching alarm does not apply event recording.
  •  When using the face matching function on the operation screen, the display changes to 1-screen or 

4-screen display, on the wide view screen, it changes to 3-screen display. It will not work on the multiscreen 
(1-screen or 4-screen display when the screen segments are equally divided by the setting).

  •  When "Alarm action" is selected for "Mode" of "Advanced face matching alarm setup", the sequential dis-

play on the live monitor stops.

  •  When several people appear in images at the same time, face matching may take time, or it may not be 

possible to match all facial images. 

  •  A detected person displayed on the face matching result window may sometimes not be the same as the 

one who has registered the facial image. 

  •  Refer to the installation guide for setup and further information about the face matching function.  

 

Face matching alarm actions

When a face matching alarm occurs, the following notifications will be issued:

An alarm indication and the name of the facial image (name of detected person) will be 

displayed in the status display area. 

The latest face matching result will be displayed

Note:

  •  When displaying images in wide view, the operation panel will open automatically. 
  •  When copying or playing back images, the face matching result window will not be displayed. 
  •  Up to 16 facial images can be memorized. It is possible to switch between facial images by clicking the 

[Previous]/[Next] buttons.

 

Other alarm actions

  •  The alarm indicator on the front panel of the recorder will blink. 
  •  The buzzer sounds. 
  •  A face matching alarm is output from a terminal on the rear panel (if set up). 
  •  An alarm e-mail is sent (if set up). 

     

About the face matching function

Matched facial image

Registered facial image

Summary of Contents for WJ-NV200K








































































































Reviews: