*1
Can be changed to alarm display. Call display flashes in red. (
Page
151
)
(Consult with the administrating company or the company that installed the system.)
*2
"Intensity" and "estimated arrival time" do not appear if your apartment building uses simplified intensity
display.
Installer
Setting
㐿㍤
UNLOCK
ᓳᣥ⼊ႎ㖸ᱛ
㕖Ᏹ
RESET/STOP ALARM
EMERG.
FIRE CONFIRM
MENU
OFF
Ἣἴ
⏕
⚳ੌ
ࡔ࠾ࡘ
㔚Ḯ
POWER
⸃㍤
UNLOCK
ᓳᣥ⼊ႎ㖸ᱛ
㕖Ᏹ
RESET/STOP ALARM
EMERG.
FIRE CONFIRM
MENU
OFF
Ἣἴ
⏕
⚳ੌ
ࡔ࠾ࡘ
㔚Ḯ
POWER
Fire
Call 1
Manager’s Message
Please contact the person above.
Gas
Ventilation
Emergency
Delivery
When the Periphery of the MENU Button is Flashing
*
1
The Emergency Button or an Extra Emergency Button has been pressed.
Confirm the details and take appropriate measures such as informing the neighbors. The alarm sound will
stop when you press the Stop Alarm Button, or the Emergency Button or Extra Emergency Button is reset.
●
The base unit or when you have pressed the emergency button by mistake
Press the Emergency Button again.
●
When you have pressed an Extra Emergency Button by mistake
Reset methods vary depending on the equipment used.
The call ends automatically about 1 minute after it starts.
A talk with the Building Manager Room ends
automatically after about 4 minutes.
•
The talk lamp turns from flashing to lighting.
•
A beep will play.
Press the TALK button
1
Speak into the microphone
2
Internal call
(Call sub-base unit)
Press the TALK button
3
The call sound plays when a call is made from the Main Entrance, Unit Entrance or Building Manager Room.
A lamp also lights up. For Main Entrance: Talk lamp (red) and lobby lamp (red); For Unit Entrance: Talk lamp
(yellow); For Building Manager Room: Talk lamp (red) and Manager lamp (red).
•
A beep is played, the call lamp on the screen
disappears, and the call ends.
(When the call is from the Main Entrance, the
lobby lamp also turns off.
）
(When the call is from the Building Manager
Room, the Manager lamp also turns off.
）
•
For how to extend the talk time, refer to Page 36.
•
After a call, you can talk for approximately
10 seconds without pressing the talk button.
For this time, the TALK button on the base
unit lights in red, and the talk light (green) on
the calling sub-base unit light up (green)
•
After 10 seconds have elapsed, the system enters
the calling state (talking is cut off), the TALK button
on the called base unit flashes in red and Talk lamp
(green) on the call sub-base unit will turn off.
3
•
You can talk with the base unit or call sub-base
unit from which the response was made.
* The base unit and call sub-base units from
which no response was made will enter the
standby state.
4
•
The call ends automatically about 1 minute after
it starts.
Press the Extension button
1
2
A "Beep" sound will play
For call sub-base unit
The Main Entrance will unlock.
Once the Unlock button is pressed,
the call will automatically end
approximately 5 seconds later.
Stop Alarm
Button
Emergency Button
Press this button to stop
the alarm sound, etc.
MENU Button
*The figure indicates a typical model.
•
If you press the MENU Button when the
periphery of the MENU Button is flashing,
the periphery of the MENU Button turns
off, and a notification indicator appears
on the screen.
•
Indicators on the screen will disappear
with no operation for about 3 minutes or
longer if they are alarm indicators, or with
no operation for about 30 seconds or
longer if they are Notice indicators, and
then the periphery of the MENU Button
will flash again.
■
Meanings of Major Screen Displays and Measures
Some screens do not appear depending on the equipment
or function settings of the building of your residence.
A fire has broken out.
Check the situation and take appropriate
measures such as prompt initial
fire-fighting, report, or evacuation. The
alarm sound will stop when you press the
Stop Alarm button or the detector is reset.
Page
146 to 147
If you do not press the TALK button to end the
call, sounds in the room may be overheard.
A gas leak has occurred.
Shut off the main gas valve and
open the windows and doors to
ventilate the room. The alarm
sound will stop when you press the
Stop Alarm Button or gas is gone.
Alarm Display
The gas and CO Alarm has detected
incomplete combustion (carbon monoxide).
Open the windows and doors to ventilate
the room. Stop using the device that is
causing the incomplete combustion. The
alarm sound will stop when you press
the Stop Alarm Button or incomplete
combustion is no longer detected.
Page
148
Page
149
Page
155
Page
47
Page
48
Page
150
A parcel has been delivered to
the delivery box.
Take the parcel out of the
delivery box.
You have a message from the
Building Manager Room.
Call the Building Manager
Room and check on the
message.
The call button is pressed and
you are being called.
Check on the call and take
appropriate measures. The call
sound will stop when you press
the Stop Alarm Button or the
call button is reset.
Notice Display
Call indicator:
flashes in yellow
When the TALK button on the base unit or
call sub-base unit is pressed, you can talk
Press the TALK button on the base unit
or calling sub-base unit to end the call
While talking with the caller at the Main Entrance, press the
Unlock button flashing in green.
Note
Page
198 to 199
Talk
(Call sub-base unit)
Page
35
* The extension adapter for your dwelling unit (VGD8210) (sold separately) is
required to be installed on the Base Unit to connect the Call Sub-base Unit.
VOLUME
EXTENSION
UNLOCK
TALK
呼出音量
室内呼
解錠
通話
EMERG.
非常
MANAGER
VOLUME
EXTENSION
UNLOCK
TALK
管理呼
呼出音量
室内呼
解錠
通話
EMERG.
非常
Unlock
Button
Flashes when the door can be
unlocked (luminous Unlock Button)
TALK
button
Extension
button
Unlocking the Main Entrance
(Luminous Unlock Button)
Page
35
Page
41
■
Other Screen Displays
Some screens do not appear depending on the equipment
or function settings of the building of your residence.
Detector Activation Display
(only for VGDT product number)
Fire Dector Fault Display
Gas Detector Fault Display
Security 1 Display
Security 2 Display
Page
146
Page
148
Page
149
Page
152
Page
153
*2
Earthquake Display
(Intensity 3 to less than intensity 5-lower)
*2
Earthquake Display
(intensity 5-lower or higher)
Earthquake Occurrence Display
(S wave sensor activated)
Earthquake Erroneous
Report Display
*2
Earthquake Test Display
Page
160
Page
160
Page
160
Page
161
Page
161
Elevator Stopped
Elevator Restored
Wireless equipment failure
has occurred display
Wireless unit battery
is dead display
Power Consumption Display
(with level indicator)
Page
163
Page
163
Page
157
Page
157
Page
158
Power Consumption Display
(without level indicator)
Water Leak Display
General Announcement
Display
General Purpose
Alarm Display
Emergency Announcement
Display
Page
158
Page
156
Page
159
Page
51
Page
51
Fire Detector Activated
Breakout Of Fire
→
Fire Confirm Button
To Cancel
→
Alarm Stop Button
Earthquake Alarm
Intensity 3
in 60 sec.
Earthquake Alarm
Intensity 5-lower
in 60 sec.
Earthquake Alarm
Intensity 6-lower
in 30 sec.
Test
Earthquake
Water Leakage
Alarm 1
General Announcement
Emergency Announcement
The earthquake alarm
from a moment
ago was an error.
Fire Dector
Fault
Elevator Restored
Wireless unit battery is dead
Too much electricity is being used.
Elevator Stopped
Gas Detector
Fault
Security 1
Security 2
20 40
60 80
100
Power Consumption
(
%
)
Wireless equipment failure
has occurred.
Too much electricity
is being used.
Summary of Contents for Windea HA D Series
Page 34: ...MEMO MEMO ...
