background image

Service Manual

PEG1311050CE
Version:1402

Ventilating Fan

(North America Market)

WhisperSense

TM

FV-08VQCL5
FV-11VQCL5

CONTENTS

2.Parts Identification

3.Wiring Diagram

4.Parts List

PAGE

2~4

6~7

5

WARNING

This service information is designed for experienced repair technicians only and is not designed for use by 
the general public. It does not contain warnings or cautions to advise non-technical individuals of potential 
dangers in attempting to service a product. Products powered by electricity should be serviced or repaired 
only by experienced professional technicians. Any attempt to service or repair the product or products dealt
with in this service information by anyone else could result in serious injury or death.

IMPORTANT SAFETY NOTICE

There are special components used in this  equipment which are important for safety. These parts are 
marked by      in the Schematic Diagrams, Exploded Views and Replacement Parts List. It is essential
that these critical parts should be replaced with manufacturer's specified parts to prevent shock, fire 
or other hazards. Do not modify the original design without permission of manufacture.
We suggest to handle such parts after the static electricity prevention.
It is forbidden to touch the PCB parts by bare hands during the repairing process.  

1.Specifications

1

5.Replacement Guide

8~10

Summary of Contents for WhisperSense FV-08VQCL5












Reviews: