Panasonic Electric Works Nordic AB
MEW01228 Rev: 1
Operating Instructions Web512 V2.6.x for Web-server II 1598
36
The communication direction for a specified BS4
Loop
(0-3) on a
specified expansion board 1584, Autronica interface
Board
(0-3), in a
specified
Control Unit
(00-29) can be locked.
Click
A Dir.
to lock the communication in the A-direction.
Click
B Dir.
to lock the communication in the B-direction.
Click
Both
to lock the communication in both directions at the same
time.
4.11.1.4
Calibrate outputs
Like menu H5/A1.
Click
Request
to start the calibration of supervised outputs in all
(99) control units or in a specified control unit (00-29).
4.11.1.5
Close Fire door
Click
Request
to collectively close all fire doors, i.e. programmable
outputs with a control expression containing one or more trigger
conditions
Fire Door Closing (zone
–
address),
in all (99) control
units or in a specified control unit (00-29).
4.11.2
Service
–
Act. Outputs
Click
Act. Outputs
to open the
Service
–
Act. Outputs
view:
NOTE!
A latched interlocking output has to be reset via menu
H9/C3, i.e.
Reset
will not reset a latched interlocking output.
4.11.2.1
Loop unit Output
A specified
Output
(0-3) on a specified COM loop unit (
Tech. No.
)
can be activated.
Click
Set
to activate the output.
Click
Reset
to de-activate the output.
4.11.2.2
Voltage Output
A specified voltage
Output
(S0-S3) in a specified
Control Unit
(00-
29) can be activated.
Click
Set
to activate the output.
Click
Reset
to de-activate the output.
