18
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Before you begin...
• Connect Camcorder to power source.
Use AC Adaptor for longer recordings.
• Insert cassette with record tab (page 10).
• Set POWER to CAMERA.
Camera Recording
1
Press MENU
for MENU
mode.
Press UP or
DOWN
to select
PROGRAMMED REC
.
2
Press M.FOCUS.
(Current time is
displayed.)
Each additional press
of M.FOCUS
increases
start time by 30 minutes.
3
Press DOWN
to select
REC TIME
.
Press M.FOCUS
repeatedly to select one
of the options shown at
left.
To cancel the setup,
press MENU twice
.
4
Press RECORD/PAUSE
to place Camcorder in
stand-by mode.
Recording will be done as scheduled.
Note:
• Start time may not be set over 24 hours from
current time.
• Camcorder shuts off at tape end, or 12 hours
after Interval Recording starts.
• To cancel, set POWER to OFF.
Set a recording start and stop time. Or,
set a 5 or 10 second interval recording
to be done each minute.
*1
Record 5 seconds each minute.
*2
Record 10 seconds each minute.
REC TIME :
Programmed Recording
4
1
,
2
,
3
03.L153 Basic p16-18
02.12.12, 10:34 AM
18
