13
Installing the main monitor/
extension monitor
1
Attach the mounting bracket (
A
) to the wall
securely.
R
Install the mounting bracket on a vertical flat
wall (
B
).
C
Screws (accessory)
D
Hole in wall
E
60 mm
F
83.5 mm
G
7 mm
H
50 mm
2
VL-SV71BX/CX/ML/SX/AZ and VL-MV71BX/
CX/ML/SX/AZ models:
Connect the wires.
R
Connect the wires correctly according to
"Wiring schematic diagram".
R
How to make wiring connections
While pressing on the button (
A
) with a
pointed object such as a screwdriver, insert
the wire into the terminal connector (
B
). (To
disconnect a wire, while pressing on the
button (
A
), pull out the wire.)
C
Bare wire at tip: 9 mm
D
Wiring from doorphone or other device
VL-SV72AZ and VL-MV72AZ models:
Connect the DC cable and wires.
R
Connect the wires correctly according to
"Wiring schematic diagram".
2-1 How to connect the DC cable
A
Remove screw A (
A
) and then remove the
terminal cover.
B
While pressing on the button (
B
) with a
pointed object such as a screwdriver, insert
the wires of the DC cable into the terminal
connectors (non-polar).
C
Make sure to replace the terminal cover.
Bare wire at tip:
C
11 mm
D
42 mm
E
Wiring from power supply unit
2-2 How to make wiring connections
While pressing on the button (
F
) with a
pointed object such as a screwdriver, insert
the wire into the terminal connector (
G
). (To
disconnect a wire, pull out the wire while
pressing on the button (
F
).)
H
Bare wire at tip: 9mm
I
Wiring from doorphone
A
B
C
D
E
F
G
H
B
C
D
A
2-2
2-1
2-2
A
B
E
C
D
G
H
F
I
prj_6905-en_gb.book Page 13 Monday, April 24, 2017 6:10 PM
