Adding extra Wireless Monitors (Pairing)
R
A total of 4 Wireless Monitors (included Wireless M 3 additional Wireless Monitors (page 4))
can be used with a single Wireless Door Camera.
R
Pair additional Wireless Monitors (
) to the Base Unit (
).
1
: Plug the AC adaptor of the Base Unit into the power outlet.
2
: Press and hold the pair button (
B
) located on the bottom side of the Base Unit for about 3
seconds with a pointed object.
R
Stop pressing the pair button (
B
) when the pair indicator (
A
) starts to slowly flash.
<Bottom view>
A
B
3
: Place the additional Wireless Monitor (
) on the Base Unit (
), and then
press
M
MENU
N
.
R
Press
M
MENU
N
within 2 minutes of performing step 2.
4
: Press
M
N
(Monitor button) to start pairing.
R
When pairing is completed,
“
PAIRING COMPLETED
”
is displayed.
Note:
R
Pairing cannot be performed when another Wireless Monitor is accessing the Base Unit (for monitoring
or other purposes).
R
The monitor number of the Wireless Monitor to be paired cannot be specified.
To pair canceled Wireless Monitors
R
Perform the following operations within 2 minutes after pressing and holding the pair button of the
Base Unit (
) as explained in step 1 and 2 above.
1
Press
M
MENU
N
.
2
Select
“
ALL SETTINGS
”
by pressing arrow keys (
MDN
,
MCN
,
MFN
, or
MEN
), then press
M
N
(Monitor
button) (
“
OK
”
).
3
Select
“
PAIRING/CANCEL
”
by pressing
MDN
or
MCN
, then press
M
N
(Monitor button) (
“
OK
”
).
4
Select
“
PAIRING
”
by pressing
MDN
or
MCN
, then press
M
N
(Monitor button) (
“
OK
”
).
5
Select
“
MONITOR
”
, then press
M
N
(Monitor button) (
“
OK
”
).
6
Press
M
N
(Monitor button).
7
To finish the operation, press
M
MENU
N
2 times.
21
Useful Information
