Identifying Controls
12
Indicator / Control panel
1
Function select
●
[Volume] / [Contrast] / [Brightness] / [Colour] /
[Sharpness] / [Tint] (NTSC signal) / [Bass]
∗
/
[Treble]
∗
/ [Balance] / [Auto Tuning]
∗
[Music] or [Speech] mode in the Sound Menu
2
Channel Up / Down, Value change (when using the
F button), Switching the TV on
3
Changes the input mode
4
Mains power On / Off switch
●
Use to switch the mains power.
If you turned the TV off during Standby mode
by the remote control last time, the TV will be
in Standby mode when you turn the TV on with
Mains power On / Off switch.
●
When pressing the control panel button (1 - 4), the
control panel guide appears on the left side of the
screen for 3 seconds to highlight the pressed button.
5
Remote control signal receiver
●
Do not place any objects between the TV remote
control signal receiver and remote control.
6
C.A.T.S. (Contrast Automatic Tracking System)
sensor
●
Senses brightness to adjust picture quality when
[Eco Mode] in the Picture Menu is set to [On].
(p. 35)
7
Power LED
Red:
Standby
Green:
On
●
The LED blinks when the TV receives a command
from the remote control.
3
1
4
2
5
6
7
Rear side of the TV
3
1
4
2
5
6
7
Side of the TV
Using the On Screen Displays
- Operation guide
Many features available on this TV can be accessed via the On Screen Display menu.
■
Operation guide
Operation guide will help you to operate by using
the remote control.
Example: [Sound Menu]
1/2
0
0
0
11
0
Mode
Music
Bass
Treble
Balance
Headphone Volume
Surround
Volume Control (VAO)
Auto Gain Control
Volume Correction
Off
TV
Main Menu
Picture
Sound
Network
Timer
Setup
Select
EXIT
Selects your favourite sound
mode.
Page up
Change
RETURN
Page down
Operation guide
Select
EXIT
Selects your favourite sound
mode.
Page up
Change
RETURN
Page down
Off
■
How to use remote control
Open the main menu
Move the cursor / select from a range of options /
select the menu item (up and down only) / adjust
levels (left and right only)
Access the menu / store settings after adjustments
have been made or options have been set
Return to the previous menu
Exit the menu system and return to the normal
viewing screen
Auto power standby function
The TV will automatically go into Standby mode in the following conditions:
•
No signal is received and no operation is performed for 30 minutes in TV mode.
•
[Off Timer] is active in the Timer Menu. (p. 21)
•
No operation is performed for the period selected in [Auto Standby] (p. 39).
