T
imer Programming
44
To edit a timer programming event
Select the event
To change a timer programming event
Correct as necessary (p. 43)
To delete a timer programming event
(red)
To record with subtitles (if available)
(yellow)
Each time pressed:
auto
off
To cancel a timer programming event temporarily
(blue)
Each time pressed:
cancel
stop cancelling
To unlock the tuner and stop recording
Note
Check that the LED is orange. If not, timer programming events are not active or not stored.
Timer Programming reminder messages will remain displayed until one of the following occurs:
You press the OK button to view the programme or the EXIT button to cancel the reminder.
The timer programming event that the reminder is set for ends.
“!” identifies that two or more timer programming events are overlapped. [Ext Rec.] is given priority over [Reminder].
As for the overlapped recording events, the first event starts and finishes as programmed. The next event can then
start.
The recording of Timer Programming will automatically change to the programmed channel a few seconds before the
start time.
To stop recording the timer programming event, it may be necessary to stop the recorder manually.
The recording of Timer Programming will be performed even if the TV is in [Pause Live TV] recording (p. 63). In this
case, [Pause Live TV] recording will be cancelled.
