T
uning and Editing Channels
40
Set DVB channel manually [Manual Tuning]
Normally use [Auto Setup] or [Update Channel List] to retune DVB channels.
If tuning has not been done completely or for adjusting the direction of the aerial, use this function.
All channels found will be added to the Channel List.
DVB-C:
1
Enter the frequency
2
Search
Auto
Auto
4
74,00 MHz
100
100
No.
Channel Name
Type
New
DVB-C Manual Tuning
Frequency
Symbol Rate
Service ID
Signal Quality
Signal Strength
%
%
Normally set [Symbol Rate] and [Service ID] to [Auto].
DVB-T:
1
Adjust frequency for each channel
2
Search
[CH21]
100
100
No.
Channel Name
Type
New
DVB-T Manual Tuning
Frequency
Signal Quality
Signal Strength
474,00 MHz
%
%
select channel
adjust frequency
Set where the level of [Signal Quality] becomes the maximum.
Set Analogue channel manually [Manual Tuning]
[Fine Tuning]:
Use to make small adjustments to the tuning of an individual programme (affected by weather conditions, etc.).
[Manual Tuning]:
Set Analogue channel manually after Auto Setup.
Set [Sound System] and [Colour System], and then perform this function. Normally set [Colour System] to [Auto].
If a VCR is connected only with the RF cable, select channel position [0].
SC1
Auto
2
78
1
41
CH33
1 BBC1
Fine Tuning
Manual Tuning
Sound System
Colour System
Analogue Manual Tuning
SC1: PAL B, G, H / SECAM B, G
SC2: PAL I
SC3: PAL D, K / SECAM D, K
F: SECAM L, L’
1
Select the channel position
2
Select the channel
3
Search and store
search
store
