70
Problem
Actions
HDMI
Sound is unusual
Set the sound setting of the connected equipment to
●
“2ch L.PCM”.
Check the “HDMI1 / 2 / 3 Input” setting in the Sound Menu. (p. 29)
●
If digital sound connection has a problem, select analogue sound
●
connection. (p. 67)
Pictures from external
equipment are unusual
when the equipment is
connected via HDMI
Check the HDMI cable is connected properly. (p. 62)
●
Turn the TV and equipment Off, then turn them On again.
●
Check an input signal from the equipment. (p. 67)
●
Use an equipment compliant with EIA/CEA-861/861B.
●
Other
The TV does not switch On
Press and hold the standby On / Off switch on the remote control
●
for about 1 second if Power LED is red.
Check the mains lead is plugged into the socket outlet.
●
The fuse in the mains plug may have blown. Replace it with one of
●
an identical rating (p. 4).
The TV goes into Standby mode
Auto power standby function is activated. (p. 9)
●
The TV enters Standby mode about 30 mins. after analogue
●
broadcasting ends.
The remote control does not work
or is intermittent
Are the batteries installed correctly? (p. 6)
●
Has the TV been switched On?
●
The batteries may be running low. Replace them.
●
Point the remote control directly at the front of the TV (within about
●
7 m and a 30 degree angle of the front of the TV).
Situate the TV away from sunshine or other sources of bright light
●
not to shine on the TV’s remote control signal receiver.
Parts of the TV become hot
Even when the temperature of parts of the front, top and rear
●
panels has risen, these temperature rises will not pose any
problems in terms of performance or quality.
Permanently lit spots on screen
Due to production process involved in this technology this may
●
result in some pixels which are permanently lit or unlit. This is not a
malfunction.
An error message appears
Follow the message’s instructions.
●
If the problem persists, contact your local Panasonic dealer or the
●
authorized Service Centre.
FAQs
