8
Accessories / Options
Quick Start Guide
Attaching / removing the pedestal
Warning
Do not disassemble or modify the pedestal.
●
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than the one provided with this TV.
●
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
●
If you use the pedestal while it is physically damaged, personal injury may result. Contact your local Panasonic
dealer immediately.
During set-up, make sure that all screws are securely tightened.
●
If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Ensure that the TV does not fall over.
●
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injury
may result.
Two or more people are required to install and remove the TV.
●
If two or more people are not present, the TV may be dropped, and personal injury may result.
When removing the pedestal from the TV, do not remove the pedestal by the methods other than the specified
procedure.
(See below)
●
Otherwise the TV and / or pedestal may fall over and become damaged, and personal injury may result.
Assembly screws (3)
Neck
Base
M4 × 18
Assembly screw for base (1)
M4 × 18
Assembly screws for pedestal (2)
1
Place the TV screen face-down
on a cushioned, clean surface to
protect the screen from damages
and scratches.
2
Use the assembly screw for base
to fasten the neck to the base
securely.
3
Use the assembly screws for
pedestal to fasten the pedestal
securely to the TV.
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1
Place the TV screen facing down on a flat surface place where maintained with soft materials (such as a blanket)
for protecting the display screen.
2
Remove assembly screws for pedestal with screw driver.
3
Remove the pedestal from the TV.
