background image

64

Input signal that can be displayed

COMPONENT 

(Y, P

B

, P

R

)

, HDMI

 Mark: Applicable input signal

Signal name

COMPONENT

HDMI

525 (480) / 60i

525 (480) / 60p

625 (576) / 50i

625 (576) / 50p

750 (720) / 60p

750 (720) / 50p

1,125 (1,080) / 60i

1,125 (1,080) / 50i

1,125 (1,080) / 60p

1,125 (1,080) / 50p

1,125 (1,080) / 24p

PC 

(from D-sub 15P)

Applicable input signal for PC is basically compatible to VESA standard timing.

Signal name

Horizontal frequency (kHz)

Vertical frequency (Hz)

640 × 400 @70 Hz

31.47

70.07

640 × 480 @60 Hz

31.47

59.94

640 × 480 @75 Hz

37.50

75.00

800 × 600 @60 Hz

37.88

60.32

800 × 600 @75 Hz

46.88

75.00

800 × 600 @85 Hz

53.67

85.06

852 × 480 @60 Hz

31.44

59.89

1,024 × 768 @60 Hz

48.36

60.00

1,024 × 768 @70 Hz

56.48

70.07

1,024 × 768 @75 Hz

60.02

75.03

1,024 × 768 @85 Hz

68.68

85.00

1,280 × 768 @60 Hz

47.70

60.00

1,280 × 1,024 @60 Hz

63.98

60.02

1,366 × 768 @60 Hz

48.39

60.04

Macintosh13” (640 × 480)

35.00

66.67

Macintosh16” (832 × 624)

49.73

74.55

Macintosh21” (1,152 × 870)

68.68

75.06

PC 

(from HDMI terminal)

Applicable input signal for PC is basically compatible to HDMI standard timing.

Signal name

Horizontal frequency (kHz)

Vertical frequency (Hz)

640 × 480 @60 Hz

31.47

60.00

750 (720) / 60p

45.00

60.00

1,125 (1,080) / 60p

67.50

60.00

Note

Signals other than above may not be displayed properly.

The above signals are reformatted for optimal viewing on your display.

PC signal is magnified or compressed for display, so that it may not be possible to show fine detail with sufficient 

clarity.

PC connection

A PC may be connected to this TV so that the PC screen is displayed and sound is heard from the TV.

PC signals that can be inputted: Horizontal scanning frequency 31 to 69 kHz; vertical scanning frequency 

59 to 86 Hz (more than 1,024 signal lines could result in incorrect display of the image).

A PC adapter is not necessary for the DOS/V-compliant D-sub 15-pin connector.

Note

Some PC models cannot be connected to this TV.

To listen to PC sound from the TV, connect the audio cable to COMPONENT-AUDIO terminals. (p. 60)

When using PC, set the colour display quality of PC to the highest position.

For details of the applicable PC signals 

  see above 

Max. display resolution 

Aspect

4:3

1,024 × 768 pixels

16:9

1,366 × 768 pixels

D-sub 15-pin connector signal

Pin No.

Signal Name

Pin No.

Signal Name

Pin No.

Signal Name

R

GND (Ground)

NC (not connected)

G

GND (Ground)

NC (not connected)

B

GND (Ground)

HD

NC (not connected)

NC (not connected)

VD

GND (Ground)

GND (Ground)

NC (not connected)

Technical Information

Summary of Contents for VIERA TX-L19X10B









































































Reviews: