5
■
Install TV on a stable surface
If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to
falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
Using cabinets or stands recommended by the manufacturer of the television.
●
Only using furniture that can safely support the television.
●
Ensuring the television is not overhanging the edge of the supporting furniture.
●
Not placing the television on tall furniture (for example, cupboards or bookcases) without
●
anchoring both the furniture and the television to a suitable support.
Not standing the televisions on cloth or other materials placed between the television and
●
supporting furniture.
Educating children about the dangers of climbing on furniture to reach the television or its controls.
●
■
When cleaning the TV, remove the mains plug
Cleaning an energized TV may cause electrical shock.
●
■
When the TV is not going to be used for a long period of time, remove the mains plug
This TV will still consume some power even in the Off mode, as long as the mains plug is still
●
connected to a live socket outlet.
■
Transport only in upright position
Transporting the TV with its display panel facing upward or downward may cause damage to the
●
internal circuitry.
■
Allow sufficient space around the TV for radiated heat
Important Installation Notices
■
Do not block the rear air vents
Blocked ventilation by newspapers, table cloths, curtains, etc. may cause overheating, fire or
●
electrical shock.
■
Do not apply strong force or impact to the display panel.
This may cause damage resulting in injury.
●
■
Do not expose your ears to excessive volume from the headphones
Irreversible damage can be caused.
●
■
The TV is heavy. Handle the TV by 2 or more people.
Support as shown to avoid injury by the TV tipping
or falling.
Do not display a still picture for a long time
This causes the image to remain on the plasma screen (“image retention”).
This is not considered a malfunction and is not covered by the warranty.
Typical still images
Programme number and other logos
●
Image displayed in “4:3” mode
●
Video game
●
Computer image
●
To prevent image retention, contrast is lowered automatically after a few minutes if no signals are
sent or no operations are performed. (p. 55)
When using the pedestal, keep a space between the bottom
●
of the TV and the surface where the TV is set.
In case of using Wall-hanging bracket, follow the manual of it.
●
10
(cm)
Minimum distance
10
10
7
■
Auto power standby function
The TV will automatically go to Standby mode in the following conditions:
●
no signal is received and no operation is performed for 30 minutes in Analogue TV mode
•
“Off Timer” is active (p. 13)
•
no operation is performed for the period selected in “Auto Standby” (p. 27)
•
■
Keep the TV away from these types of equipment
Electronic equipment
●
In particular, do not place video equipment near the TV. Electromagnetic interference may distort
images / sound.
Equipment with an infrared sensor
●
This TV also emits infrared rays. This may affect operation of other equipment.