How to Use Menu Functions
28
Menu
Item
Adjustments / Configurations (alternatives)
Sound
Speaker Distance to
Wall
Compensates for the low frequency sound due to the distance between the
speakers and the wall
[Over 30cm] / [Up to 30cm]
●
If the back space between the TV and wall is over 30 cm, [Over 30cm] is
recommended.
●
If the back space between the TV and wall is within 30 cm, [Up to 30cm] is
recommended.
MPX
Selects multiplex sound mode (if available)
[Stereo]:
Use this normally.
[Mono]:
When stereo signal cannot be received.
[M1] / [M2]:
Available while mono signal is transmitted.
HDMI1 / 2 Input
Selects to fit the input signal
[Digital] / [Analogue]
(p. 68)
[Digital]:
When sound is carried via the HDMI cable connection
[Analogue]:
When sound is not carried via the HDMI-DVI adaptor cable
connection
●
For HDMI input
Reset to Defaults
Press the OK button to reset the current Sound Mode, [Balance], [Headphone
Volume] and [Surround] to the default settings
Setup
Off Timer
Sets the duration of time until the TV automatically goes into Standby mode
[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes)
(p. 17)
Eco Navigation
Automatically sets the TV to the most suitable energy-saving mode
●
If you press the OK button, the following items are set as below:
[Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save],
[Power Save] [On]
[Intelligent Auto Standby] [On (No reminder)]
[Auto Standby] [2 hours]
Child Lock
Applies access control for channels or inputs to prevent unwanted access (p. 33)
Tuning Menu
Channel List Edit
Skips the unwanted channels or edits channels (p. 31)
Auto Tuning
Automatically searches for the receivable channels (p. 31)
Manual Tuning
Searches for the channels manually (p. 32)
OSD Language
Changes language for on-screen displays
Display Settings
Teletext
Teletext display mode
[FASTEXT] / [List]
(p. 20)
Teletext Character
Set
Selects teletext language font
[English] / [CIS] / [E.Europe] / [Persian]
Input Labels
Accesses the input labels list to select the label of each input mode or set to skip
unconnected one for easier identification and selection in [Input Selection] (p. 22)
or banner
●
To name each input mode freely, select [User input] and set characters
(maximum 10 characters).
●
To skip the input mode, select [Skip].
Banner Display
Timeout
Sets how long the Information banner stays on screen
[0 (No display)] / [1] / [2] / [3] / [4] / [5] / [6] / [7] / [8] / [9] / [10] (seconds)
Playing Time
Display
Set to [On] to display a continuous record of time spent using Game mode in the
top right of the screen every 30 minutes
[Off] / [On]
●
This function is available when [Viewing Mode] is set to [Game]. (p. 25)
