How to Use the Menu Functions
36
Sound
Item
Adjustments / Configurations (alternatives)
Mode
• Music
• Speech
• User
Selects basic sound mode
•
The selected mode affects all input signals.
[Music]:
Improves sound quality for watching music videos, etc.
[Speech]:
Improves sound quality for watching news, drama, etc.
•
In Music and Speech modes, you can adjust [Bass] and [Treble]
settings, and those settings will be stored for each mode.
[User]:
Adjusts the sounds manually by using the equaliser to suit your
favourite sound quality.
•
For the User mode, [Equaliser] will appear on the Sound Menu instead
of [Bass] and [Treble]. Select the [Equaliser] and adjust the frequency.
[Equaliser] (below)
Bass
Increases or decreases level to enhance or minimise lower, deeper
sound output
Treble
Increases or decreases level to enhance or minimise sharper, higher
sound output
Equaliser
Adjusts the frequency level to suit your favourite sound quality
•
This function is available when [Mode] is set to [User].
•
Select the frequency and change the frequency level by using the
cursor button.
•
If you want to enhance the bass sound, raise the level of the lower
frequency. If you want to enhance the treble sound, raise the level of
the higher frequency.
•
To reset the levels of each frequency to the default settings, select the
[Reset Equaliser Settings] by using the cursor button, and then press
the OK button.
Balance
Adjusts the volume level of right and left speakers
Headphone Volume
Adjusts the volume of the headphones
Surround
• Off
• V-Audio
• V-Audio Surround
• V-Audio ProSurround
Surround sound settings
[V-Audio]:
Provides a dynamic enhancer of width to simulate improved
spatial effects
[V-Audio Surround]:
Provides a dynamic enhancer of width and depth
to simulate improved spatial effects
[V-Audio ProSurround]:
Provides a three-dimensional sound space
with digital reverb effects
Auto Gain Control
• Off
• On
Adjusts the current volume level if it is extremely different from the
previous viewed channel or input mode
Volume Correction
Adjusts the volume of individual channel or input mode
Speaker Distance to
Wall
• Over 30cm
• Up to 30cm
Adjusts the low frequency sound
•
If the back space between the TV and wall is over 30 cm, [Over 30cm]
is recommended.
•
If the back space between the TV and wall is within 30 cm, [Up to 30cm]
is recommended.
MPX
• Stereo
• Mono
• M1
• M2
Selects multiplex sound mode (if available)
[Stereo]
: Use this normally
[Mono]
: When stereo signal cannot be received
[M1]
/
[M2]
: Available while mono signal is transmitted
•
Analogue TV mode only
