How to Use Menu Functions
Advanced
25
Menu
Item
Adjustments / Configurations (alternatives)
Sound
Mode
Selects basic sound mode
(Music / Speech / User)
●
The selected mode affects all input signals.
Music : Improves sound quality for watching music video, etc.
Speech : Improves sound quality for watching news, drama, etc.
●
In Music and Speech mode, you can adjust “Bass” and “Treble”
settings, and those settings will be stored for each mode.
User : Adjusts the sounds manually by using the equalizer to suit your
favourite sound quality.
●
For the User mode, “Equalizer” will appear on the Sound Menu
instead of “Bass” and “Treble”. Select the “Equalizer” and adjust
the frequency. “Equalizer” (below)
Bass
Increases or decreases level to enhance or minimise lower, deeper sound output
Treble
Increases or decreases level to enhance or minimise sharper, higher sound output
Equalizer
Adjusts the frequency level to suit your favourite sound quality
●
This function is available when “Mode” is set to “User”.
●
Select the frequency and change the frequency level by using the cursor button.
●
If you want to enhance the bass sound, raise the level of the lower frequency. If
you want to enhance the treble sound, raise the level of the higher frequency.
●
To reset the levels of each frequency to the default settings, select the “Reset
Sound Defaults” by using cursor button, and then press the OK button.
Balance
Adjusts the volume level of right and left speakers
Headphone Volume
Adjusts the volume of the headphones
Surround
Surround sound settings
(Off / V-Audio / V-Audio Surround)
V-Audio: Provides a dynamic enhancer of width to simulate improved
spatial effects
V-Audio Surround: Provides a dynamic enhancer of width and depth to
simulate improved spatial effects
●
Switching is also possible by the Surround button on the remote control (p. 10).
Volume Correction
Adjusts the volume of individual channel or input mode
Speaker Distance
to Wall
Adjusts the low frequency sound
(Over 30cm / Up to 30cm)
●
If the back space between the TV and wall is over 30 cm, “Over 30cm”
is recommended.
●
If the back space between the TV and wall is within 30 cm, “Up to
30cm” is recommended.
MPX
Selects multiplex sound mode (if available) (p. 50)
●
Normally : Stereo
●
Stereo signal cannot be received: Mono
●
M1 / M2 : Available while mono signal is transmitted
●
Analogue TV mode only
Digital Audio
Preference
Selects the initial setting for Audio tracks
(Dolby D / MPEG)
If programme has both Dolby Digital and MPEG audio tracks, priority is
given to what you select
Dolby D : A method of coding digital signals developed by Dolby
Laboratories. Apart from stereo (2ch) audio, these signals can
also be multi-channel audio.
MPEG : An audio compression method that compresses audio to small
size without any considerable loss of audio quality.
●
Digital TV mode only
SPDIF Selection
SPDIF : A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL
AUDIO OUT terminal
(Auto / PCM)
Auto : Dolby Digital is output as Dolby Digital Bitstream. HE-AAC and
MPEG are output as PCM.
PCM : Digital output signal is fixed to PCM.
●
For Digital TV mode or Video mode (p. 40)
MPEG Optical
Level
Adjusts the audio level of MPEG output from DIGITAL AUDIO OUT
terminal as the initial setting
(0 / -2 / -4 / -6 / -8 / -10 / -12dB)
●
Normally, MPEG sound is louder comparing with the other types of audio track.
●
Digital TV mode only
TH-L32U20A_EN.indb 25
TH-L32U20A_EN.indb 25
2/22/2010 4:08:51 PM
2/22/2010 4:08:51 PM
