background image

Using Media Player

58

 

Playback from the list

1

  Select the content

2

  Start playback

 

If you stopped the last playback on the way, the confirmation screen is 
displayed to select whether to start from where you stopped last time or 
from the beginning. (USB HDD only)

 

If the content has multiple programmes with the different parental 
ratings, the highest restriction is valid for the content. Once you unlock 
the restriction, all the programmes in the content can be played back.

 

To edit recording content 

(USB HDD only)

1

  Select and tick the 

content to edit

2

  Display the option 

menu

3

  Select the item and edit

 

Selectable items vary depending on the situation.

Option Menu

Create Group
Release Group

Change Protect Status

Exclude from Group

 select

 edit

[Create Group]:

Two or more contents can be grouped. Select and tick all the desired contents, and then select [Create Group].

[Release Group]:

Select the created group to release, and then select [Release Group]. (To release several groups at once, tick all the 
desired groups.)

[Exclude from Group]:

Select the group and press the OK button to display the grouped contents. To exclude only the specific content from 
the group, tick it and then select [Exclude from Group]. (To exclude several contents at once, tick all the desired 
contents.)

[Change Protect Status]:

Select the content to protect from deletion, and then select [Change Protect Status]. Perform the same way to cancel 
the protection. (To change the status of several contents at once, tick all the desired contents.)

 

To delete the selected content

1

  Select the content

2

  Delete the content

3

  Confirm

Delete

Are you sure you want to delete?

No

Yes

 select
 set

 

To select two or more 
contents

 

How to operate in the playback

Example: Playback

Das Erste

USB

00:15:39

00:02:05

EXIT

RETURN

Manual skip

Operation guide

Information banner

Chapter List

A-B repeat

 

To display / hide the operation guide 
and information banner

 

To return to list

 

To operate the playback

   Rewind

 Pause (displays the time seek bar) / 

Playback

     Stop

   Fast forward

[Manual skip]

 

Press to skip forward about 30 seconds.

 

Press and hold to skip backward about 15 seconds.

 

To repeat between the starting point “A” and finishing point “B”

 

To the previous / next chapter

 / 

 

A recorded content is automatically 
divided into chapters (about 5 minutes 
for each).

Set “A” and “B” in order

 

The points will be reset by pressing this button 
again or other operations.

 

T

 

T

 

T

 

You

 

T

To 

 

D

 

You

1

  D

o

 A

You
ter

 

T

1

  D

M

th-l32e5aW.indb   58

th-l32e5aW.indb   58

5/9/2012   10:31:15 AM

5/9/2012   10:31:15 AM

Summary of Contents for VIERA TH-L32E5AW

































































































Reviews: