background image

4

5

4 : 3

12

Safety Precautions

AC 220-240 V

50 / 60 Hz

Do not display a still picture for a long time

This causes the image to remain on the plasma

screen ("after-image").

This is not considered a malfunction and is

not covered by the warranty.

To prevent after-image, the screen saver is 

automatically activated after a few minutes if no signals 

are sent or no operations are performed. (p. 50)

Electronic equipment
In particular, do not place video equipment near the TV 

(electromagnetic interference may distort images / sound).
Equipment with an infrared sensor
This TV also emits infrared rays (this may affect 

operation of other equipment).

Keep the TV away from these equipment

Warning & Caution

Typical still images

Channel number and other logos

Image displayed in 4:3 mode

Video game

Computer image

Notes

IMPORTANT: THE MOULDED MAINS PLUG

FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.

The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the mains plug which is 

marked with the letter E or by the Earth symbol   or coloured GREEN or GREEN-AND-YELLOW.

The wire which is coloured BLUE must be connected to the terminal in the mains plug 

which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal in the mains plug 

which is marked with the letter L or coloured RED.

How to replace the fuse.

Open the fuse compartment with a screwdriver and replace the fuse.

As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings

identifying the terminals in your mains plug, proceed as follows.

WARNING: – THIS APPARATUS MUST BE EARTHED.

IMPORTANT:

 – The wires in this mains lead are coloured in accordance with the following code: –

 Green-and-Yellow: 

Earth Blue: Neutral Brown: Live

If a new mains plug is to be fitted, please observe the wiring code as shown below.

If in any doubt, please consult a qualified electrician.

If the fitted moulded mains plug is unsuitable for the socket outlet in your home, then the fuse shall be

removed and the mains plug cut off and disposed of safety. There is a danger of severe electrical shock 

if the cut off mains plug is inserted into any 13 amp socket.

If the mains plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced.

If you lose the fuse cover the mains plug must not be used until a replacement cover is obtained.

A replacement fuse cover may be purchased from your local Panasonic Dealer.

This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 10 amp fuse is

fitted in this mains plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating 

of 10 amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark 

ASA

 or the BSI mark 

 on the body of the fuse.

Handling the mains plug

Ensure that the mains plug is easily accessible at all times. The On / Off switch on this model does not fully disconnect the TV 

from the mains supply. Remove the mains plug from the wall socket when the TV is not used for a prolonged period of time.

Ensure the grounding pin on the mains plug is securely connected to prevent electrical shock.

 

 An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing connection.

Note

If the TV is not switched off when the TV station stops transmitting, it will automatically go to standby mode after 

30 minutes. This function will operate only in Analogue TV mode.

Do not expose to 

direct sunlight and 

other sources of heat

Avoid exposing the TV to direct sunlight 

and other sources of heat. To prevent 

fire never place any type of candle or 

naked flame on top or near the TV.

Power source

This TV is designed to operate on 220-240V, 50 / 60 Hz AC.

Display panel

Cabinet

Mains plug

Daily care: Gently wipe the surface clean of dirt by using 

a soft cloth.

Major contamination: Wipe the surface clean using a soft 

cloth dampened with clean water or water containing a 

small amount of neutral detergent. Then, using a soft dry 

cloth, evenly wipe the surface clean until it is dry.

Daily care: Wipe the surface clean using a soft dry cloth.

Major contamination: Dampen a soft cloth with clean water 

or water containing a small amount of neutral detergent. 

Then, wring the cloth and wipe the surface clean with it. 

Finally, wipe the surface clean with a dry cloth.

Wipe the mains plug with a dry cloth at regular intervals. 

(Moisture and dust may lead to fire or electrical shock.)

First, remove the mains plug from the socket outlet.

Caution

• 

The surface of the display panel has been specially 

treated and may be easily damaged.

Do not tap or scratch the surface with your fingernail or 

other hard object.

• 

Use care not to subject the surface to insect repellent, 

solvent, thinner, or other volatile substances

(this may degrade surface quality).

Caution

• 

Use care not to subject the TV's surfaces to detergent.

(A liquid inside the TV could lead to product failure.)

• 

Use care not to subject surfaces to insect repellent, 

solvent, thinner, or other volatile substances

(this may deteriorate the surface by peeling the paint).

• 

Do not allow the cabinet to make contact with a rubber 

or PVC substance for a long time.

Maintenance

Do not remove the cover

Do not remove the rear cover as live parts are accessible when it is removed. There are no user serviceable parts inside.

Do not expose to rain or 

excessive moisture

To prevent damage which might result in electric 

shock or fire, do not expose this TV to rain or 

excessive moisture.

  This TV must not be exposed to dripping or 

splashing water and objects filled with liquid, 

such as vases, must not be placed on top of or 

above the TV.

Do not block the rear 

ventilation openings

Ventilation should not be impeded by covering 

the ventilation openings with items such as 

newspapers, tablecloths and curtains.

Cabinet and display panel care

Remove the mains plug from the wall socket.

  The cabinet and display panel can be cleaned 

with a soft cloth moistened with mild detergent 

and water. Do not use solutions containing 

benzol or petroleum.

  TV can produce static electricity, care must be 

taken whenever touching the TV screen.

Use only the dedicated 

stands / mounting equipment

Using an unauthorized stand or other fixtures may 

make the TV shaky, risking injury. Be sure to ask 

your local Panasonic dealer to perform setup.

Use optional stands / mounts (p. 6).

Do not place the TV on 

sloped or unstable surfaces

The TV may fall off or tip over.

 

Due to weight and size please ensure a quali

fi

 ed technician installs this product

Allow sufficient space around 

the TV for radiated heat

10

10

6

10

7

(cm)

Do not allow children to 

handle SD card

As with an small object, SD card can be 

swallowed by young children. Please remove 

SD card immediately after use.

Transport only in upright position

Transporting the TV with its display panel facing upright or downward may cause damage to the internal circuitry.

Summary of Contents for Viera TH-65PX600B





























Reviews: