38
Advanced
39
EXIT
MENU
SD CARD
HOLD
PHOTO
VIEW MODE
1/19
Filename
100-0001
Date
01/01/2001
Pixel
15X16
Select
Select
SD CARD : Return
Slide show
Exit
View
100-0001
100-0003
100-0004
100-0005
100-0008
100-0009
100-0010
100-0012
100-0016
Cannot
read file
Select
Rotate
Exit
List
100-0001
Interval
Viewing setup
5sec
Repeat
Off
M a i n m e n u
P i c t u r e m e n u
Vi e w i n g s e t u p
SD CARD
red
■
Slide show
red
•
For details, see p. 39
Viewing from card
The still images recorded by the digital camera will be displayed.
View
4
Insert the SD Card
•
For details on SD Cards,
see p. 48.
Select the photo to be viewed
3
Displayed one at a time
To previous photo
To thumbnail
Rotate 90
˚
(clockwise)
To next photo
1
2
Select SD mode (PHOTO VIEW MODE)
select
view
Rotate 90
˚
(anti-clockwise)
Operation
guide
(Thumbnail screen)
Caution
•
During the operation, no signals are output from the monitor output terminals.
•
"Date" shows the date on which the recording was made by the digital camera. It
shows "**/**/****" when recordings are made without date signal.
■
To return to
thumbnail screen
SD CARD
■
To return to TV
SD
Card
Label surface
(Photos)
■
To open
■
Start Slide show (operate in step )
■
Slide show settings (operate in step
or
)
•
V
iewing from card (Photos)
Open the cover
Press
Push until a
click is heard
■
To remove
■
To insert
Press the centre of the card
Error display
(images that could not be loaded, etc.)
Selected
photo
■
To display the operation guide
Slide show
Select the photo for the first view
Start Slide show
Display the
menu
Select "Viewing setup"
Select the functions and set
access
select
•
"Picture menu" (p. 23)
Menu
Item
Adjustments / Configurations (alternatives)
Viewing
setup
Interval
Select slide show interval
(5 / 10 / 15 / 30 / 60 / 90 / 120sec)
Repeat
Slide show repeat
(Off / On)
Blue LED
Note
•
Blue LED lights while SD Card is inserted if set "SD card LED" to "On" in Setup menu (p. 25).
set
select
Cautions in handling SD Card
•
Do not remove the card while the TV is accessing data (this can damage card or TV).
•
Do not touch the pins on the back of the card.
•
Do not subject the card to a high pressure or impact.
•
Insert the card in the correct direction (otherwise, card may be damaged).
•
Electrical interference, static electricity, or erroneous operation may damage the data or card.
•
Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the
TV. (Panasonic is not liable for any deterioration or damage of recorded data.)
Message
Meaning / Action
On screen messages
Cannot read file
•
The file is broken or unreadable.
•
The TV does not support the format.
(For the applicable formats and data, see p. 48.)
Is SD Card in?
•
Insert a SD card.
No valid file to play
•
The card has no data.
Selected photo
information is displayed
•
To stop in mid-cycle
SD CARD
•
To pause
