35
Advanced
•
Advanced Settings
(freesat)
Connect
to the
Broadband
network
Network
Setup
Satellite Signal Condition
Satellite Programme
101 BBC 1 Scotland
Signal Quality
Signal Strength
0
0
Network ID
Transport Stream ID
Satellite Lock Indicator
003B
07FF
10
Not Locked
10
Selects a programme and checks the freesat signal condition.
•
To change the programme
A good Signal Strength is not an indication of
suitable signal for freesat reception. Please
use the Signal Quality indicator as follows:
Signal Quality:
•
Green bar Good
•
Yellow bar Poor
•
Red bar Bad (Check the Satellite dish)
Check
freesat
signal
Signal
Condition
Sets the network settings for future applications from broadcasters to enable greater
interactivity and added features for freesat services.
•
To connect to your network p. 56 and p. 60
■
Connect to network
Performs automatic testing of the network connection for the TV.
Set the network setting items
see below
Select “Connect to network” and access to test
•
It takes a while to test.
access
select
Connected
The test is successful and the network settings become effective.
Not connected
Check the settings and connections, and then perform this function again.
■
Acquire IP address
■
Acquire DNS address
Sets IP address, Subnet mask, Gateway, Primary DNS and Secondary DNS.
For most users, the recommended method of connection to your network is by using Auto feature.
Select “Acquire IP address” and then set to “Auto”
Select “Acquire DNS address” and then set to “Auto”
•
The available settings are displayed automatically.
set
select
Manual settings
If you wish to set these functions manually, select “Manual”.
Select “IP address”, “Subnet
mask”, “Gateway”, “Primary DNS”
or “Secondary DNS”
Move the cursor and enter the
number
select
move
■
Proxy
Sets Proxy address.
•
This is the address of the relay server that is connected to the target server instead
of the browser and sends data to the browser. Setting is required if speci
fi
ed by the
provider.
Select “Proxy”
Enter the address
access
select
Proxy
Host
http://
A B C D E F G H I
J K L M N
U V W X Y Z
0 1 2 3 4 5 6
a b c d e
f
g h
i
j
k
l m n
u v w x y z
(
) + -
.
* _
O P Q R S T
7 8 9
!
:
#
o p q r
s
t
Set characters
Store
set
select
RETURN
■
Proxy port
Sets Proxy port number.
•
This number is also speci
fi
ed by the provider with the Proxy address.
Select “Proxy port”
Move the cursor and enter the number
select
move
■
Speed mode
(Auto / 10base half / 10base duplex / 100base half / 100base duplex)
Sets the LAN speed setting.
•
Set to “Auto” normally.
•
If “Connect to network” test fails, try the other speed modes.
Select “Speed mode” and then set the speed mode
set
select
■
MAC address
MAC address is a unique address that identi
fi
es hardware in the network. (for information only)
