24
Basic features of 3D Eyewear
This product cannot be used as sunglasses.
This product can be worn over vision correction glasses.
Part names and functions
You can enjoy 3D images by wearing the 3D Eyewear supplied with this TV and to view 3D broadcasts and 3D image software.
Optional Accessories (p.8)
Battery status shown by indicator lamp
Power/indicator lamp status
Battery status
Lights for 2 seconds when turned on
Sufficient battery level
Flashes 5 times when turned on
Low battery level
Flashes once every 2 seconds when in use
Operating normally
Lights continuously when off
Charging
Lamp off
Power off
Indicator lamp
Lights or flashes during use or
charging to show the status of
the rechargeable battery.
Infra-red receiver
Receives infra-red signals from the television.
The liquid crystal shutter open/close timing is controlled by receiving infra-
red signals from the television, which provide 3D expression of the images.
If the eyewear stops receiving infra-red signal from the television, the power
automatically switches off after 5 minutes.
Liquid Crystal Shutter
(lens)
Controls the images for 3D
viewing.
The left and right liquid crystal
shutters are alternately opened
and closed in time with the left
side and right side images that
are alternately displayed on the
television to achieve the 3D effect.
Power switch (bottom side
of 3D Eyewear)
Switches on the 3D Eyewear power.
The 3D Eyewear is turned on by setting
the power switch to “ON”. Set the
power switch to “OFF” to turn off the 3D
Eyewear.
Charging port
Connect the charging cable.
(p. 25)
Viewing 3D images on TV
